Data Sheet

Data sheet | Item number:804-112
PCB terminal block; Push-button; 2.5 mm²; Pin spacing 5 mm; 12-pole; Push-
in CAGE CLAMP®
www.wago.com/804-112
06.12.2018Page /1 7
L = (pole no. x pin spacing) + 1.5mm
Color:
Item description
PCB terminal strips with Push-in CAGE CLAMP connection and push-button actuation
®
Push-in termination of solid and ferruled, fine-stranded conductors
A large conductor entry accommodates conductors with a cross-section up to 12 AWG with an insulation diameter up to 4.2 mm
Terminal strips with spacers to increase pin spacing
Versions available with custom internal commoning (factory assembly), e.g., commoning ground conductor
10 mm pin Other variants can be requested via the WAGO sales department or, if necessary, configured at https://configurator.wago.com/:
spacing version with spacers,Direct marking,Mixed-color terminal strips,Other colors,Other pole numbers,Versions for Ex i
Data
Electrical data
Ratings per IEC/EN 60664-1
Rated voltage (III / 3) 250 V
Rated impulse voltage (III / 3) 4 kV
Rated voltage (III / 2) 320 V
Rated impulse voltage (III / 2) 4 kV
Rated voltage (II / 2) 630 V