Datasheet

7
1
Volume 1
fine-stranded,
with pin terminal
(gastight crimped)
fine-stranded,
with ferrule 1
(gastight crimped)
fine-stranded,
tip-bonded
Testing via testing tap (2009-182) (up to max. 42V)
Testing via test plug adapter (2009-174) (up to max.
42V)
4-conductor sensor terminal block with ground contact
3-conductor actuator LED terminal block with a connected actuator
– Description and Handling –
Testing
Testing
Potential levels: two adjacent commoning options on a
current bar
Continuous commoning in the potential levels via push-in
type jumper bars for even pole numbers (2000 Series)
Commoning: Potential Level
For sensor and actuator terminal blocks without ground
connection to the DIN-rail, the ground connection can be
performed by commoning to the terminal block with a
ground foot.
Ground Commoning
Upper level: two independent signal passages, in 3.5 mm pin spacing, with dual jumper slot
Lower levels: two interconnected potential clamping units, with a single jumper slot, can be commoned in both directions