User manual

Controls (Overview) • 39
Dialog Boxes
WAGO-I/O-SYSTEM 759
WAGO-I/O-CHECK 2
4.8.2.7 2 Channel Digital Output (Process Data Dialog Box)
Order number and position of the selected I/O module are shown at the
titlebar.
The text boxes of the output column indicate the state (ON / OFF) of the
digital outputs 1 and 2. If an output is active, the text ´ON´ is displayed on
green background.
Use one of the following options to change the state of a digital output: Click
to the corresponding text box or use the <Tab> key to select a check box and
hit the <Space> key to toggle the output state.
Warning!
Outputs which are set manually by WAGO-I/O-CHECK (e.g. motor
contactors, or valves) will remain until they are manually reset. In this
case, switching the outputs off via control software (e.g. by limit switches)
has no effect !
Note:
Please refer to the chapter Notes on Setting and Resetting of Digital I/O
Modules concerning the reaction of digital outputs in the different
operation modes.
Note:
The state of digital outputs is indicated in the node display by colored
LED´s. To toggle the state it is also possible to click the LED´s.
A click with the right mouse key on the text box of the description column
opens a context menu to rename the channel description.
4.8.2.8 2 Channel Digital Output with Diagnosis (Process Data Dialog Box)
Order number and position of the selected I/O module are shown at the
titlebar.