User manual

Controls (Overview) • 21
Menubars
WAGO-I/O-SYSTEM 759
WAGO-I/O-CHECK 2
4.2.1.6 Menu Module
The Module menu contains the following commands:
Process data ... Shows the process data of the selected module.
Rename ... Renames a digital I/O module. This command is only
available if a digital I/O module is selected.
Settings ... Changes the parameters of the selected module. This
command is only available if the parameters of the selected
module are changeable (i.e 750-xxx/003-xxx).
4.2.1.7 Menu Settings
The Settings menu contains the following commands:
COM-Port ... Configures the serial PC interface for communication with
the node.
Language Opens a submenu to select the langage for the WAGO-I/O-
CHECK application.
4.2.1.8 Submenu Language
The Language submenu containes the following commands:
Use the commands to select the desired language for the WAGO-I/O-CHECK
application.