Datasheet

750-513 / 753-513
1
223
1.4
2-Channel Relay Output Module 230 V AC, 30 V DC
Isolated outputs; 2 make contacts
Fig. 750 Series/Technical data see page 24/Delivered without miniature WSB markers
750/753 Series marking see pages 10 ... 11 / 12 ... 13
DO 2
Data contacts
relay 2
relay 1
Status
DO 1
Status
Power jumper contact
L 2 L 1
N
14
24
K1
K2
C
D
B
A
13 23
750-513
14
13
L
Status
DO 24
23
750-513
1
2
3
4
5
6
7
8
The connected load is switched via the digital output (relay contacts) from the
control system.
The internal system voltage is used to trigger the relay.
The NO contacts are electrically isolated.
The switched status of the relay is shown by a LED.
Actuators with a ground (earth) wire may be directly connected to the module.
Description
Item No.
Pack.
Unit
2DO 230V AC 2.0A/ Relay 2NO/
Potential Free
750-513 10
1)
2DO 230V AC 2.0A/ Relay 2NO/
Potential Free / without power jumper
750-513/000-001 1
2DO 230V AC 2.0A/ Relay 2NO/
Potential Free (without connector)
753-513 1
1)
Also available individually
Accessories
Item No.
Pack.
Unit
753 Series Connectors 753-110 25
Coding elements 753-150 100
Miniature WSB Quick marking system
plain 248-501 5
with marking see pages 352 ... 353
Approvals
Also see "Approvals Overview" in Section 1
Conformity marking 1
Shipbuilding (versions upon request) ABS, BV, DNV, GL, KR, LR*, NKK*, PRS*, RINA*
*753 Series, pending
r UL 508
r ANSI/ISA 12.12.01 Class I, Div. 2, Grp. ABCD, T4
4 EN 60079-0, -15
EN 61241-0, -1
I M2 / II 3 GD Ex nC IIC T4
Technical Data
No. of outputs 2 make contacts
Max. current consumption (internal) 100 mA
Max. switching voltage 250 V AC / 30 V DC
Switching power 500 VA / 60 W (resistive load)
cos j max. =0.4; L/R max = 7 ms
Min. switching current 10 mA / 5 V DC
Max. switching current 2 A AC/DC
Max. switching frequency 30/min (at nominal load)
Pull-in time (max.) 10 ms
Bounce time (typ.) 1.2 ms
Drop-out time (max.) 10 ms
Contact material Silver alloy
Mechanical life 2 x 10
7
switching operations
Electrical life 3 x 10
5
switching operations
(2 A / 250 V AC) or (2 A / 30 V DC)
Isolation 1.5 kV eff. (field/system)*;
* 2.5 kV rated surge voltage;
Overvoltage category III
Internal bit width 2 bits
Wire connection CAGE CLAMP
®
Cross sections 0.08 mm² ... 2.5 mm² / AWG 28 ... 14
Stripped lengths, 750/753 Series 8 ... 9 mm / 0.33 in
9 ... 10 mm / 0.37 in
Width 12 mm
Weight 53.5 g
EMC: 1 - immunity to interference acc. to EN 60000-6-2 (2005)
EMC: 1 - emission of interference acc. to EN 61000-6-4 (2007)
EMC: marine applications
- immunity to interference acc. to Germanischer Lloyd (2003)
EMC: marine applications
- emission of interference acc. to Germanischer Lloyd (2003)
WAGO Kontakttechnik GmbH & Co. KG
Subject to design changes 18.05.2012
Postfach 2880 - D-32385 Minden
Hansastr. 27 - D-32423 Minden
Phone: [phone] E-Mail: [e-mail]
Fax: [phone] www.wago.com