Manualshelf

Datasheet

ManualsBrandsWAGO ManualsPCB ConnectorsSocket enclosure - cable 734 Total number of pins 8 Contact spacing: 3.81 mm 50 pc(s)
1234567
Data sheet | Item number:734-208
www.wago.com/734-208
25.04.2019Page /2 7
L = (pole no. x pin spacing) + 2.2mm
Item description
Universal connection for all conductor types
Easy cable pre-assembly and on-unit wiring via vertical and horizontal CAGE CLAMP actuation
®
Strain relief plates and housings for field assembly
100% protected against mismating
Coding via coding fingers
Safety information 1:
The is designed without breaking capacity for compliance with DIN EN 61984. When used as intended, MCS
MULTI CONNECTION SYSTEM (MCS)
Connectors shall not be connected/disconnected when live or under load. The circuit design should ensure header pins, which can be touched, are
not live when unmated.
Data
Electrical data
Ratings per IEC/EN 60664-1
Rated voltage (III / 3) 160 V
Rated impulse voltage (III / 3) 2.5 kV
Rated voltage (III / 2) 160 V
Rated impulse voltage (III / 2) 2.5 kV
Rated voltage (II / 2) 320 V
Rated impulse voltage (II / 2) 2.5 kV
Rated current 10 A
Approvals per UL 1059