Datasheet
Data sheet | Item number:231-336/001-000
www.wago.com/231-336/001-000
10.05.2019Page /2 4
Horizontal or vertical PCB mounting via straight or angled solder pins
Pin cross-section: 1 x 1 mm
With coding fingers
Safety information 1:
The is designed without breaking capacity for compliance with DIN EN 61984. When used as intended, MCS
MULTI CONNECTION SYSTEM (MCS)
Connectors shall not be connected/disconnected when live or under load. The circuit design should ensure header pins, which can be touched, are
not live when unmated.
Data
Electrical data
Ratings per IEC/EN 60664-1
Rated voltage (III / 3) 320 V
Rated impulse voltage (III / 3) 4 kV
Rated voltage (III / 2) 320 V
Rated impulse voltage (III / 2) 4 kV
Rated voltage (II / 2) 630 V
Rated impulse voltage (II / 2) 4 kV
Rated current 12 A
Approvals per UL 1059
Rated voltage UL (Use Group B) 300 V
Rated current UL (Use Group B) 10 A
Rated voltage UL (Use Group D) 300 V
Rated current UL (Use Group D) 10 A
Approvals per UL 1977
Rated voltage per UL 1977 (factory wiring only) 600 V
Rated current per UL 1977 (factory wiring only) 10 A
Approvals per CSA
Rated voltage CSA (Use Group B) 300 V
Rated current CSA (Use Group B) 10 A
Rated voltage CSA (Use Group D) 300 V
Rated current CSA (Use Group D) 10 A
Connection data
No. of poles 6
Total number of potentials 6
Number of connection types 1