User's Manual

What’s in the box
Your HD video monitor package contains the
following items. Save your sales receipt and
original packaging in the event warranty service
is necessary.
Connect and charge the parent unit
When you have connected the parent unit,
press and hold to power on.
The battery icon indicates the battery status (see
the following table).
NOTE
S
• The parent unit is fully charged after 3 hours of
continuous charging.
• It takes longer to charge when the parent unit is
turned on. To shorten the charging time, turn the
parent unit off while charging.
• The standby time varies depending on your actual
use.
Battery
indicators
Battery
status
Action
The screen
displays .
The battery
has very little
charge and
may be used
for only a
short time.
Charge
without
interruption
(about
30 minutes).
The battery
icon becomes
solid .
The battery
is fully
charged.
To keep
the battery
charged,
connect it to
AC power
when not in
use.
2. Place the camera unit at a desired place.
NOTES
• To turn off the camera unit, unplug the camera unit
from the power supply.
Cable connection (optional)
After you have paired the camera unit with your
parent unit via Wi-Fi, you can connect the camera
unit to the Internet using the network cable to
optimize your Internet connection. Refer to the
online app manual for the instructions on how to
pair your camera unit with your parent unit.
Connect
You can choose to set up the camera unit
for desktop usage, wall mounting, or ceiling
mounting.
NOTES
• Use only the power adapters supplied with this
product.
• Make sure the electrical outlets are not controlled by
wall switches.
• The power adapters are intended to be correctly
oriented in a vertical or floor mount position. The
prongs are not designed to hold the plug in place if it
is plugged into a ceiling, under-the-table, or cabinet
outlet.
• Make sure the parent unit, the camera unit and the
power adapter cords are out of reach of children.
Connect the camera unit
Wi-Fi connection
NOTES
• Before you connect the camera unit, make sure you
have Internet access and a Wi-Fi router
(IEEE 802.11 b/g/n). Charges apply and service plan
may vary for Internet access. Router is not included.
• Do not plug in the network cable.
• To maintain compliance with the FCC’s RF exposure
guidelines, place the camera unit at least 20cm from
nearby persons.
1. Connect the power adapter to the camera unit
and a power supply.
mic
x 2
x 2
Overview
Camera unit overview
mic
a
b
c
d
e
volume
-
+
f
g
h
k
l
micro SD
i
j
Go to
www.vtechphones.com
for support and the latest VTech
product news.
Congratulations
on purchasing your new VTech product. Before
using this HD video monitor, please read
Important safety instructions.
For support, shopping, and everything new at
VTech, visit our website at
www.vtechphones.com.
Requirements
Make sure your system includes the following
components, and they meet the minimum
requirement.
Network Wi-Fi
Wi-Fi router 2.4GHz IEEE 802.11 b/g/n
Internet connection
At least 1.0 Mbps upload
bandwidth per camera
micro SD card
Support Class 4 or higher,
with storage capacity up to
32GB
How the system works
The Wi-Fi router (not included) provides Internet
connectivity to your HD video monitor system.
It serves as a communicating channel between
your camera unit and parent unit, allowing you to
monitor and/or control your camera unit wherever
you are.
volume
-
+
micro SD
Installation guide
VM991
Wi-Fi Pan and Tilt
HD Video Monitor
1
Light sensor
2
Infrared LEDs
• Allow you to see clearly in a dark
surrounding.
3
Camera lens
4
Microphone
5
Antenna
• Connect to router with Wi-Fi.
6
Speaker
7
Power jack
8
Ethernet port
• Connect to router with an RJ45
network cable (optional).
9
3.5mm line jack
• Connect to audio output device
(optional).
10
micro SD card slot
11
LED indicators
• Flash orange and blue alternately
when the camera unit is in pairing
mode.
• Orange is steady on when the camera
unit is connecting to the Internet.
• Orange and blue are steady on when
the camera unit is idle.
• Flash orange and blue slowly during
video streaming.
• Flash orange and blue quickly and
alternately when the camera unit is
updating its firmware.
12 Volume –
• Press to decrease the camera unit
speaker volume.
Volume +
• Press to increase the camera unit
speaker volume.
13
Pair/reset button
• Press and hold for three seconds to
enter pairing mode.
Parent unit overview
1
+ / VOL / -
• Press to increase or decrease the
speaker volume.
2
• Press and hold to power on or off, or
to reboot the parent unit.
• Press to turn on or off the screen
display without powering off the
parent unit. You can still hear sound
from the camera unit if the camera is
streaming and the speaker volume
of the parent unit is turned on.
3
5-inch touch screen monitor
• When the screen is turned on and
locked, swipe to unlock the screen.
4
Microphone
5
Antenna
6
Speaker
7
micro SD card slot
8
RESET
• Force reboot the parent unit.
9
3.5mm audio jack
• Connect to stereo earphone.
volu
me
-
+
micr
o SD
volume
-
+
micr
o SD
BC
Installation guide Important safety
instructions
Quick start guide
3s
Protect your privacy and online
security
VTech cares about your privacy and peace of
mind. That’s why we’ve put together a list of
industry-recommended best practices to help
keep your wireless connection private and your
devices protected when online. We recommend
you carefully review and consider complying with
the following tips.
Ensure your wireless connection is secure.
• Before installing a device, ensure your router’s
wireless signal is encrypted by selecting the
B
“WPA2-PSK with AES” setting in your router’s
wireless security menu.
Change default settings.
• Change your wireless router’s default wireless
network name (SSID) to something unique.
• Change default passwords to unique, strong
passwords. A strong password:
- Is at least 10 characters long.
- Is complex.
- Does not contain dictionary words or
personal information.
- Contains a mix of uppercase letters,
lowercase letters, special characters and
numbers.
Keep your devices up to date.
• Download security patches from
manufacturers as soon as they become
available. This will ensure you always have
the latest security updates.
• If the feature is available, enable automatic
updates for future releases.
Disable Universal Plug and Play (UPnP) on your
router.
• UPnP enabled on a router can limit the
effectiveness of your firewall by allowing other
network devices to open inbound ports without
any intervention or approval from you. A virus
or other malware program could use this
function to compromise security for the entire
network.
For more information on wireless connections
and protecting your data, please review the
following resources from industry experts:
1. Federal Communications Commission:
Wireless Connections and Bluetooth Security
Tips–
www.fcc.gov/consumers/guides/how-protect-
yourself-online.
2. U.S. Department of Homeland Security:
Before You Connect a New Computer to the
Internet–
www.us-cert.gov/ncas/tips/ST15-003.
3. Federal Trade Commission: Using IP
CamerasSafely–
https://www.consumer.ftc.gov/articles/0382-
using-ip-cameras-safely.
4. Wi-FiAlliance:DiscoverWi-FiSecurity–
http://www.wi-.org/discover-wi-/security.
10
Micro USB 2.0 port
• Connect to a power supply for
charging.
• Connect to a personal computer as
an external storage for transferring
manually captured snapshots and
recorded videos stored in the parent
unit.
WIFI MAC:0012A4A3CE4
LAN MAC:00122A4A3CE5
S/N:VM500006007
m
Model:
VM991 BU
B