User's Manual

Telephone operation

Options while on calls

Blind transfer

While on an outside call, you can transfer the call to a specific device or any

device without notifying them.

To transfer an outside call directly from a cordless handset:

1. During the call, press MENU/

SELECT.

2. Press

MENU/SELECT to choose >Transfer.

If you have one handset, the outside call is put on hold and your handset

shows Transferring call... The telephone base rings and shows

Transfer from HANDSET.

If you have more than one handset, your screen shows TRANSFER

TO: Use the dialing keys to eenter a specific device number (0 for the

telephone base, 1-9 for handsets 1-9, TONE followed by 0-2 for

handsets 10-12, or TONE followed by # for all devices), or press CID

or DIR to scroll to the desired device and press MENU/SELECT. The

outside call is put on hold and your handset screen shows Transferring

call... or Transferring call to all... The other device rings and shows

Transfer from HANDSET X (HANDSET represents the handset name, X

represents the handset number).

3. To answer the call on the destination handset, press, press

PHONE/FLASH or

/SPEAKERSPEAKER. To answer the call on the telephone base, press, press /SPEAKERSPEAKER.

The initiating handset shows Call transferred and goes to idle mode.

To transfer an outside call from the telephone base:

1. During the call, press MENU/

SELECT.

2. Press

MENU/SELECT to choose >Transfer.

If your have one handset, the outside call is put on hold and the

telephone base shows Transferring call... The handset rings and shows

Transfer from BASE 0 (BASE represents the base name).

If you have more than one handset, the telephone base shows TRANSFER

TO: Use the dialing keys to eenter a specific handset number (1-9 for

handsets 1-9, TONE followed by 0-2 for handsets 10-12, or TONE

followed by

for all handsets), or press CID or DIR to scroll to the

desired handset and press MENU/SELECT. The outside call is put on hold

and the telephone base shows Transferring call... or Transferring call to

all... The other handset(s) rings and shows Transfer from BASE 0 (BASE

represents the base name).

3. To answer the call on the destination handset, press, press PHONE/FLASH or

/SPEAKERSPEAKER. The telephone base shows Call transferred and goes to

idle mode.

•