User's Manual

1616
Telephone settings
Set date and time
The answering system announces the date and time of each message prior to
playing it. Before using the answering system, set the date and time as follows. If
you subscribe to caller ID service, the day, month and time are set automatically
with each incoming call. However, the year must be correct so that the day of the
week can be calculated from the caller ID information. You can also turn off the
date and time settings of the caller ID service (see CID time synchronization on
page 17) and set the date and time manually.
Press MENU/SELECT when the handset or the telephone base is not in use.
Press or to highlight >Settings, then press
MENU/SELECT.
Press
or to highlight >Set date/time, then press
MENU/SELECT.
Press MENU/SELECT to choose >Date & time.
Press
or to select the month then press
MENU/SELECT, or use the dialing keys to enter a two-digit number (01-12).
Press or to select the date then press MENU/SELECT, or use the dialing
keys to enter a two-digit number
(01-31).
Press or to select the year then press MENU/SELECT, or use the dialing
keys to enter a two-digit number
(00-99) then press MENU/SELECT.
Press
or to select the hour then press MENU/SELECT, or use the dialing
keys to enter a two-digit number
(01-12).
Press
or to select the minute then press MENU/SELECT, or use the
dialing keys to enter a two-digit number (00-59).
Press
or to highlight AM or PM, or press 2 for AM or 7 for PM.
Press
MENU/SELECT to save the settings and return to the previous menu.
You hear a confirmation tone.
If the date and time are not set when a message is recorded, the system
announces, “Time and date not set,” before each message plays.
The telephone plays two beeps if you enter an invalid number.
•
•
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.