User's Manual Part 2
www.vtechphones.com
51
Special features
Connection setup on handset
There are four steps on setting up the connection on handset. Follow the
instruction closely in this section.
Searching for network
• Press MENU/SEL in idle mode to display menu.
•Use the UP or DOWN NavKey (^) or (v) to reach Applications, and press
MENU/SEL to select.
•Use the UP or DOWN NavKey to reach Setup Connection, and press
MENU/SEL to select.
• The screen displays a warning message about not able to receive call during
setting. Press the softkey YES to continue setting. Press the softkey NO if you
do not want to continue.
• After pressing YES, the screen displays Searching for available network...
Ŗ 6JG UETGGPFKURNC[U C NKUV QH CXCKNCDNGPGVYQTMU +H[QW ſPF C UGEWTKV[ NQEM
symbol (
) next to the network name, it means that the network is locked
with a security key or password, and you need a security key to unlock it.(go
to the section Secutiy lock on how to unlock)
• You can press the softkey RESCAN to scan again for available networks if you
wish.
• If you choose the network without a secutity lock, use the UP or DOWN NavKey
@QTXVQTGCEJVJGEJQKEGCPFRTGUU/'075'.VQEQPſTOCPFRTQEGGF
to the section Enter PC IP address.
Setup Connection
Warning - While
setting up the
connection you will
not be able to
receive calls
Setup Connection
on this handset.
Do you want to
continue?
NOYES
WiFi setup
• WEP (Wired
Equivalent
Privacy) refers to
a security protocol
for wireless local
networks which
CTGFGſPGFKPVJG
802.11b standard.
• WPA menas Wi-Fi
Protected Access.
• PSK refers to the
pre-shared key,
meaning every
user is given the
same passphrase.