Technical Specifications

Specifications

RUBBER STRINGER/RISER COMBO

ACCEPTABLE MANUFACTURER

1. VPI Corporation, 3123 South 9

Street, P.O. Box 451, Sheboygan, WI 53082-0451

FLOOR COVERING SPECIFICATION

1. Rubber Stringer/Riser Combo MEETS ASTM F-1861 standards

2. VPI Rubber Stringer/Riser Combo Type TP

3. Rubber Stringer/Riser Combo with sizes as follows:

Width: 10.25” Thickness: 0.080” Roll: 24” PCS per CTN:1 24 lf. / roll

MANUFACTURING SPECIFICATIONS

1. See all ASTM specifications per VPI web site: www.vpiflooring.com

2. Meets VPI specific VOC, durability and other performance standards without exception or deviation

ADHESIVE SPECIFICATIONS

1. VPI 503 acrylic or 100 Epoxy adhesives.

2. Use specified trowel and roller per VPI installation and maintenance instructions.

PRE- INSTALLATION AND INSTALLATION SPECIFICATIONS

1. See VPI wall base installation and maintenance instructions for all installation requirements

POST INSTALLATION SPECIFICATIONS

1. Prohibit traffic in area for 48 hours after installation.

WARRANTY INFORMATION

1. 1 year warranty that products are free from defects in materials and workmanship.

VPI Technical Service: (800) 874-4240

Rubber Stringer/Riser Combo Specs 20

PAGE 1
Specifications RUBBER STRINGER/RISER COMBO ACCEPTABLE MANUFACTURER 1. VPI Corporation, 3123 South 9th Street, P.O. Box 451, Sheboygan, WI 53082-0451 FLOOR COVERING SPECIFICATION 1. Rubber Stringer/Riser Combo MEETS ASTM F-1861 standards 2. VPI Rubber Stringer/Riser Combo Type TP 3. Rubber Stringer/Riser Combo with sizes as follows: Width: 10.25” Thickness: 0.080” Roll: 24” PCS per CTN:1 24 lf. / roll MANUFACTURING SPECIFICATIONS 1. 2. See all ASTM specifications per VPI web site: www.vpiflooring.