V O RT E X V8 USER MANUAL S I LV E R S E R I E S INFORMATION FOR USE FOR MODELS VORTEX SILVER SERIES V8 SSUM_GB_2010-R1_11-2010 The leading version of this brochure is the English one which shall prevail to the exclusion of the national translation on hand. Copyright 2010 by CAMCO Produktions- und Vertriebs-GmbH für Beschallungs- und Beleuchtungsanlagen Fischpicke 5, D-57482 Wenden, Germany Telephone +49 (0) 2762 408-0 VS IO RT E X LV E R S E R I E S Please visit our website www.camcoaudio.
V O RT E X IMPORTANT SAFETY INSTRUCTIONS S I LV E R S E R I E S IMPORTANT SAFETY INSTRUCTIONS 1. General The amplifier may only be used in accordance with the information provided in the user manual. Before and during the usage of the amplifier please ensure that all recommendations, especially the safety recommendations as detailed in the user manual, are adhered to. 5.
V O RT E X IMPORTANT SAFETY INSTRUCTIONS S I LV E R S E R I E S 10. Connections When you connect the amplifier to other equipment, turn off the power and unplug all of the equipment from the supply source. Failure to do so may cause an electric shock and serious personal injury. Read the user manual of the other equipment carefully and follow the instructions when making the connections. 11.
V O RT E X EXPLANATION OF SYMBOLS S I LV E R S E R I E S CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION – HIGH VOLTAGE HAZARDS EXIST WITHIN THIS PRODUCT. REFER ALL SERVICING TO AUTHORIZED PERSONNEL. THE LIGHTNING FLASH WITH ARROW HEAD SYMBOL IS INTENDED TO ALERT THE USER TO THE PRESENCE OF UNINSULATED DANGEROUS VOLTAGE WITHIN THE PRODUCT’S ENCLOSURE. THE EXCLAMATION MARK IS INTENDED TO ALERT THE USER TO IMPORTANT INSTRUCTIONS ALSO FOR MAINTENANCE IN THE LITERATURE ACCOMPANYING THE AMPLIFIER.
V O RT E X EC DECLARATION OF CONFORMITY S I LV E R S E R I E S EC Declaration Of Conformity In Accordance To EC Directives: electromagnetic compatibility (Council Directive 89/336/EEC, as amended by Directives 92/31/EEC and 93/68/EEC); low-voltage electrical equipment (Council Directive 73/23/EEC ) Manufacturer´s Name: CAMCO Produktions- und Vertriebs-GmbH für Beschallungs- und Beleuchtungsanlagen Manufacturer´s Address: Fischpicke 5, D-57482 Wenden, Germany Declares That The Product With The Model Name:
V O RT E X CONTENTS S I LV E R S E R I E S P. P. 2 IMPORTANT SAFETY INSTRUCTIONS P. 4 EXPLANATION OF SYMBOLS P. 5 EC DECLARATION OF CONFORMITY P. 6 CONTENTS P. 7 1 WELCOME 1.1 Welcome To CAMCO P. 8 2 THE AMP 2.1 Unpacking 2.2 The Amplifier P. 9 2.3 V8 – The Front 2.4 V8 – The Rear P. 10 2.5 Factory settings 3 INSTALLATION 3.1 Mounting P. 11 3.2 Cooling 3.3 Wiring 3.3.1 Analog Input - XLR Connection 3.3.2 Dual Channel Operation 3.3.3 Parallel Mono Operation P. 12 3.
V O RT E X 1 WELCOME S I LV E R S E R I E S 1.1 Welcome To CAMCO Established in 1983, CAMCO has gained worldwide experience with professional sound reinforcement technology. Within the audio market, CAMCO specialises in the production and marketing of high quality power amplifiers and sound systems to be used both on tour and in static installations.
V O RT E X 2 THE AMPLIFIER S I LV E R S E R I E S 2.1 Unpacking Please unpack and inspect your new amplifier for any damage that may have occurred during transit. If damage is found, notify the transportation company immediately. Only you as the consignee may initiate a claim for shipping damage. CAMCO will be happy to cooperate fully as needed. Please save the shipping carton as evidence of damage for the shipper’s inspection. 2.
V O RT E X 2 THE AMPLIFIER S I LV E R S E R I E S 3-11 1 2 12 2 2 2.3 V8 - The Front 1 Display 2 Touch Controls 3 Input Selection LED 4 Output Mode LED 5 Clip LED Channel A 6 Signal LED Channel A 7 Device Indicator LED 8 9 10 11 12 13 13 Clip LED Channel B Signal LED Channel B DSP LED Uman Network Status LED Cooling Air Inlet Vents Removable Air Filter System 2.
V O RT E X 7,5 mm 10,5 mm 465,0 mm 483,0 mm P.10 USER MANUAL VORTEX SILVER SERIES V8 440,5 mm 442,0 mm 452,5 mm Amplifier is switched Off Both channels active Analog 0 dB both channels Off Dual Channel 26 dB 192.168.1.1 255.255.255.0 192.168.1.1 Off 75% Unlocked 88,1 mm Power Status Mute Input Selection Level Attenuator Clip Limiter Output Mode AmpGain IP Settings IP Mask IP Gateway DSP Display Brightness Lock Device 3.
V O RT E X 3 INSTALLATION S I LV E R S E R I E S 3.2 Cooling Under normal operation of the power amp, overheating should never be a problem. The air is taken in from the front and out through the back. It is of course essential that while the power amp is running, air is able to circulate around it freely. The efficiency of the cooling will depend on both the immediate environment (e.g. an enclosed rack, direct sunlight) and that the front filter is clogged.
V O RT E X 3 INSTALLATION S I LV E R S E R I E S 3.3.4 Mono Bridge Operation One-channel mono bridged operation. 3.3.5 SPEAKON Connection Both SPEAKON connectors are connected to channel A and channel B outputs. The pin configuration of the SPEAKON connectors is as follows: V8 A Z ≥ 2*Zmin B The second channel processes the same input signal, but with reversed phase. The (single) load is connected between the two positive channel outputs using a suitable connected SPEAKON connector.
V O RT E X 3 INSTALLATION S I LV E R S E R I E S WARNING! SPEAKON connectors marked with the lightning flashes indicate high voltages that are potentially life threatening. 3.4 Mains supply When mounting or connecting the amp, always disconnect it from mains. Only connect the V8 amplifier to an appropriate AC circuit and outlet in accordance with the requirements indicated in the second line on the rating plate.
V O RT E X 4 OPERATION S I LV E R S E R I E S 4.1 Screen User Interface Due to the advanced approach with the absence of any control knobs or switches, control of all parameters is done via the screen user interface. 4.1.1 Screen User Interface Elements The screen user interface consists of four buttons and two selection bars. 1 6 Vertical Selection Bar (VSB) - scrolls through menu items 4.1.2 Handle the Selection Bars 2 3 6 4 5 -Tip the VSB at the upper half to scroll upwards.
V O RT E X 4 OPERATION S I LV E R S E R I E S 4.1.3 Hot key Functions The Hot key Functions give you a quick access to important setting screens. The Power Hot key is accessible from all menu levels and screens. 4.2 Power On-Sequence As soon as the V8 amplifer is connected to the mains power supply, it will start the Power On-Sequence. The display will show the V8 logo followed by the Power On-Screen. Power Off Hot key: Touch and hold MENU and ENTER simultaneously (≈3 s).
V O RT E X 4 OPERATION S I LV E R S E R I E S 4.3 Indicators 4.3.3 Clip LED (Channel A/Channel B) This LED indicates an overloading of the amplifier when the power output level is too high. Input Selection LED Output Mode LED Clip LED Channel A Signal LED Channel A Device Identifier LED Clip LED Channel B Signal LED Channel B DSP LED Uman LED 4.3.1 Input Selection LED The status of the bi-coloured (green/red) LED changes between off, green, and red depending on the selected Input Selection (see 4.5.1).
V O RT E X 4 OPERATION S I LV E R S E R I E S 4.4 Main Menu To switch the amplifier off use the Power menu. All settings important for operation of the amplifier are accessible in the Settings menu. Information about operating state of the amplifier like Temperature, Output Signal, Configuration Overview, and Network Overview are accessible in the Monitor menu. Adjustments for display brightness and contrast will be done in menu Display.
V O RT E X 4 OPERATION S I LV E R S E R I E S 4.8 Power Amp Protection Systems 4.8.1 Clip Limiter If the power amp is overdriven, the clip detection circuit triggers the microprocessor. The processor reduces the input signal level by controlling the DCA. The strategy is implemented in software. For sinusoidal input signals the microprocessor limits the input signal in such a way that non-linear distortions of the signal never exceed 1 %.
V O RT E X 4 OPERATION S I LV E R S E R I E S 4.9.4 Fuse Protection The average mains current can peak temporarily, depending on the load impedance and type of signal, at values several times higher than the nominal value allowed by the fuse protection. Continuous monitoring of the fuse protection status allows the conditions that would trigger the fuse protection to be predicted. In order to avoid shut-down of the amplifier due to current overload, the amplitude of the input signals will be limited.
V O RT E X 4 OPERATION S I LV E R S E R I E S 4.12 Filter Cleaning The air intake on the front of your V8 amplifier is fitted with a removable filter system. If the filter becomes clogged, the unit will not cool as efficiently as it should and may result in reduced output levels. For changing the filter, no tools are required: first, gently slide the whole plastic filter assembly a few millimeters to the left and lift it from the front panel.
V O RT E X 5 SPECIFICATION S I LV E R S E R I E S Output Power 1 kHz, THD ≤ 1%, in dual channel operation Duration limited by fuse / thermal protection for RL<8 Ω in dual channel operation or RL < 16 Ω in mono bridge operation measurement at 2 Ω without preconditioning (EN 60268-3) 1 kHz, THD ≤ 1%, in mono bridge operation 4400 W @ 16 Ω 7600 W @ 8 Ω 8000 W @ 4 Ω 7600 W @ 2 Ω 8000 W @ 1 Ω 8800 W @ 4 Ω Peak 8800 W @ 2 Ω Peak Circuitry Hybrid Class H Signal to Noise-Ratio 20 Hz - 20 kHz, 8 Ω load Power
V O RT E X S I LV E R S E R I E S 5 SPECIFICATION Frequency Response 20 Hz - 20 kHz ± 0,15 dB 8 Ω, 1 dB below rated power Input Impedance Input Gain Protection Circuits Limiter Fan LED Indicators Input Connectors Output Connectors Modes of Operation Options THD+N (typical) 22 kΩ balanced selectable: 26 dB, 32 dB or 1,4 V input sensitivity inrush-current limitation, protection circuits against power on/off transients, temperature monitoring fo transformers and heatsinks, output DC protection, temperat
V O RT E X 6 TYPICAL PERFORMANCE DIAGRAMS S I LV E R S E R I E S P.23 6 Typical Performance Diagrams tba.
V O RT E X 7 WARRANTY INFORMATION S I LV E R S E R I E S 7.1 Summary of Warranty CAMCO guarantees the V8 Amplifier to be free from defective material and/or workmanship for a period of six (6) years from the date of sale. When a defect occurs under normal installation and use, CAMCO will repair the product under this warranty. In this event, please return the amplifier to your dealer/distributor together with a copy of your sales receipt as proof of purchase.
V O RT E X 8 SERVICE INFORMATION S I LV E R S E R I E S PLEASE ENCLOSE THIS COMPLETED FORM WITH THE AMPLIFIER DO NOT SEND SEPARATELY Owner’s Information Company Name: ���������������������������������������������������������������������� ��������������������������������������������������������������������������������������������� Contact: ���������������������������������������������������������������������������������� Address: �������������������������������������������������������������������������
V O RT E X 9 MAINTENANCE INFORMATION/10 DECOMISSIONING S I LV E R S E R I E S P.26 9 Maintenance Information Cleaning and servicing the inside of the amplifier must never be carried out by unqualified personnel. The amplifier must never be opened by unqualified personnel. Cleaning and servicing work on the inside of the amplifier must only be carried out by qualified personnel.
V O RT E X S I LV E R S E R I E S COMPANY INFORMATION Mailing Address: CAMCO Produktions- und Vertriebs-GmbH für Beschallungs- und Beleuchtungsanlagen Fischpicke 5 D-57482 Wenden Germany P.27 Telephone: +49 (0) 2762 408-0 Facsimile: +49 (0) 2762 408-10 Internet: www.camcoaudio.com Email: postmaster@camcoaudio.
V O RT E X NOTICES/CHANGES MADE TO THE AMPLIFIER S I LV E R S E R I E S P.
www.camcoaudio.