Motor Grader Specification Sheet

Steering
Frame
Articulation
Circle
Circle drive
Cab & controls
Moldboard
Blade range:
Moveable Blade Control System
Drawbar
All controls are located in a 90° arc forward
and to the right of the operator. Located
forward of the operator are the engine oil
pressure, coolant temperature and fuel level
gauges, transmission gear indicator and a
multi-function Contronic monitoring display.
Located in the fully adjustable steering
pedestal are the following switches: differential
lock/unlock, hazard lights, combination turn
signal, horn and high beam headlight. Heater
and wiper/washer controls, lighting and
accessory switches are grouped in the
operator’s right hand console. This console
also contains the ignition key
and access to the circuit breaker and fuse
panel. Located to the right of the operator,
above the console, are the AWD On/Off
switch, a 16 position variable aggression dial
and the hydrostatic Creep On/Off switch.
An accelerator/decelerator foot pedal and
slider type hand throttle are standard
equipment. Outside mounted rear view mirrors
(L&R) are standard. Interior operator noise
level ranges from 78 to 81 dB(A) per ISO
6394 (enclosed cab).
Cab options
• High capacity heater/air conditioner c/w
adjustable vents, temperature control and 3
speed fan
• Fully adjustable, suspension seat
• Lower opening front windows
• Rear windshield wipers and washers
• Lower front window wipers and washers
• Modular, 24 volt radio and cassette player
with remote control
• Operator Convenience Package (lunch box,
steel vacuum bottle and holder, ashtray)
• 24 volt to 12 volt convertor for electrical
accessories or two way radio installations
Full height cab with ROPS
Inside dimensions
Height . . . . . . . . . . . . . . . . . . . . . 74.0" (1 880 mm)
Width @ controls . . . . . . . . . . . . 56.0" (1 422 mm)
Depth @ controls . . . . . . . . . . . . 55.5" (1 410 mm)
An optional Low Profile Cab is available with
an inside height of 62" (1 575 mm). All Volvo
Grader cabs and canopies are designed to
meet or exceed SAE J1040 APR. 88, ISO
3471/1-1986(E), and 86/295/EEC ROPS
requirements. The seatbelt is 2" (51 mm) wide
and meets SAE J386 JUNE 93; ISO 6683-
1981(E).
Hydrostatic power front wheel steering
incorporating two steering cylinders. Meets
SAE J1511 OCT. 90 with optional secondary
steering.
Minimum turning radius using front axle steering,
articulation, wheel lean and unlocked differential
. . . . . . . . . . . . . . . . . . . . . . . . . . . 25'6" (7 772 mm)
Steering arc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72º
Frame articulation angle . . . . . . . . . . . . . . . . . . . 22º
Articulation lock standard.
Full front and rear frame sections.
Front: Fully welded box section. Dual sloped
front frame provides excellent forward visibility.
Minimum dimensions of
box section . . . . . . . 10.5" x 14.0" (267 x 356 mm)
Plate thickness . . . . . . . . . . . . . . . . . 0.75" (19 mm)
Vertical section modulus
at arch . . . . . . . . . . . . . . . . . . 119 cu in (1 950 cm
3
)
minimum . . . . . . . . . . . . . . . 101.5 cu in (1 663 cm
3
)
maximum . . . . . . . . . . . . . . . . 212 cu in (3 474 cm
3
)
Linear weight - minimum-maximum . . . . . . . . . . . . . .
107.1 - 232.5 lb/ft (159.4 - 346.0 kg/m)
Rear: Full perimeter rear frame permits modular
powertrain mounting for ease of service and is
ideal for attachment mounting. Optional first user
lifetime warranty on frame and articulation joint.
Minimum dimensions of
rear frame . . . . . . . . . 4.0" x 10.0" (102 x 254 mm)
Plate thickness . . . . . . . . . . . . . . . . . . 0.5" (13 mm)
Twin 4.5" (114 mm) hydraulic cylinders
articulate frame 22º right and left. Anti-drift lock
valve ensures stable operation.
Hardened teeth, cut on the outside of the circle
for maximum leverage and minimum wear.
The circle is supported at six points by three
adjustable clamp plates and three adjustable
guide shoes, providing optimum circle support
and load distribution. DURAMIDE™ faced
clamp and guide shoes prevent metal-to-metal
contact and provide maximum service life.
DURAMIDE™ is a synthetic bearing material
that maximizes service life and reduces circle
system maintenance requirements.
Diameter . . . . . . . . . . . . . . . . . . 66.25" (1 683 mm)
Thickness . . . . . . . . . . . . . . . . . . . . 1.25" (32 mm)
Adjustable guide shoes. . . . . . . . . . . . . . . . . . . . . . 3
Adjustable clamp plates . . . . . . . . . . . . . . . . . . . . . 3
The Volvo dual cylinder Circle Drive System
uses direct acting hydraulic power for
exceptional turning and holding capability
under full load. Circle Drive System uses
hardened drive pinions and is protected
against impact damage by an overload cushion
valve as standard equipment.
Hydraulic drive cylinders . . . . . . . . . . . . . . . . . . . . . 2
Points of leverage . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Rotation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 360º
Fully welded box section. Narrow “T” design
permits optimum visibility to the work area.
Drawbar ball stud provides an adjustment to
compensate for different tire sizes. Blade lift
cylinder anchors are straddle mounted on
drawbar to provide maximum strength and
support.
Dimensions of
box section . . . . . . . . . 6.5" x 6.5" (165 x 165 mm)
Plate thickness . . . . . . 1.0" & 0.75" (25 & 19 mm)
Standard moldboard with
replaceable end bits . . . . . . . . . . . . 12' x 25" x 7/8"
(3 658 x 635 x 22 mm)
Blade material . . . . . . . SAE 1050 high carbon steel
Edge: through hardened . . . . . 6" x 5/8" boron steel
(152 x 16 mm)
Bolt spacing. . . . . . . . . . . . . . . . . . . . . 6" (152 mm)
• bolt size . . . . . . . . . . . . . . . . . . . . . . 5/8" (16 mm)
Slide rails supported by DURAMIDE™
bearings.
(Dimensions shown with standard moldboard)
LEFT RIGHT
Reach outside tires - articulated
frame .......120.0" (3 048 mm)....119.5" (3 035 mm)
Reach outside tires - straight
frame..........79.5" (2 019 mm)..........79" (2 007 mm)
Blade slide ...26.5" (673 mm)..........26.5" (673 mm)
Circle side
shift ................30.5" (775 mm)..........29.5" (749 mm)
Maximum bank
sloping angle........................90º...................................90º
Blade ground clearance.....................17.5" (445 mm)
Blade cutting depth.............................32.0" (813 mm)
Blade tilt range............................44º forward 6.5º back
Superior blade mobility permits steep ditch
cutting angles and back sloping without
putting the front tire on the slope.