Motor Grader Specification Sheet

ManualsBrandsVolvo ManualsLawn MowerG726B

• Configuration: Articulated frame

• Engine model: Volvo D7DGDE2

• Maximum net engine output

@2200 RPM (per SAE J1349):

198 - 235 hp (148 - 175 kW)

• Base weight: 35,400 lb (16 057 kg)

• Blade down force:

17,854 lb (8 099 kg)

• Blade pull:

All Wheel Drive – 28,019 lb (12 709 kg)

Tandem – 20,519 lb (9 307 kg)

• Single lever “Smart Shifter” transmission

control with gear memory feature

• Separate hydraulic pump & speed sensor

for each front wheel

• Variable aggression for job matching

• Maintains aggression at both front wheels

through turns

• Creep feature allows hydrostatic drive at

front wheels from 0-2.0 mph (0-3,2 km/h)

for optimum fine grading

• Wheel motor efficiencies maintained in both

forward and reverse

• AWD available at speeds up to 20.2 mph

(32,5 km/h)

• 8400 fully sequential direct drive powershift

transmission

• Choice of fully enclosed, ROPS cab in full

height or low profile configuration, or

ROPS canopy

• Moveable Blade Control System

• Load sensing, Closed Center Hydraulic

System

• Fully adjustable control pedestal with low

effort hydraulic controls

• Full front and rear frame sections designed

for attachment mounting

VOLVO MOTOR GRADER

G726B

ALL WHEEL DRIVE

Summary of content (6 pages)

PAGE 1
VOLVO MOTOR GRADER G726B ALL WHEEL DRIVE • Configuration: Articulated frame • Engine model: Volvo D7DGDE2 • Maximum net engine output @2200 RPM (per SAE J1349): 198 - 235 hp (148 - 175 kW) • Base weight: 35,400 lb (16 057 kg) • Blade down force: 17,854 lb (8 099 kg) • Blade pull: All Wheel Drive – 28,019 lb (12 709 kg) Tandem – 20,519 lb (9 307 kg) • Single lever “Smart Shifter” transmission control with gear memory feature • 8400 fully sequential direct drive powershift transmission • Separate hydraul
PAGE 2
Base operating weight (Standard equipment) Weight adjustments for various options are listed. Typically equipped operating weight: includes 14' x 25" x 7/8" (4 267 x 635 x 22 mm) moldboard and scarifier. G726B . . . . . . . . . . . . . . . . . 37,420 lb (16 973 kg) 800 1100 720 1000 640 900 800 700 600 500 400 Gross torque (lb.ft) G726B Total . . . . . . . . . . . . . . . . . . . 35,400 lb (16 057 kg) On front wheels . . . . . . . . . . 10,266 lb (4 657 kg) On rear wheels . . . . . . . . . . .
PAGE 3
Front axle Type: Fully welded steel truss, gusseted for torsional strength, oscillates on a single 3.5” (89 mm) diameter center pivot pin. Wheel lean . . . . . . . . . . . . . . . . . . . . . . . . . 15º R & L Oscillation . . . . . . . . . . . . . . . . . . . 16º up and down Ground clearance. . . . . . . . . . . . . . 24.0" (610 mm) Two 3" (76 mm) diameter wheel lean cylinders and lock valve are standard equipment.
PAGE 4
Circle drive Steering Hydrostatic power front wheel steering incorporating two steering cylinders. Meets SAE J1511 OCT. 90 with optional secondary steering. Minimum turning radius using front axle steering, articulation, wheel lean and unlocked differential . . . . . . . . . . . . . . . . . . . . . . . . . . . 25'6" (7 772 mm) Steering arc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72º Frame articulation angle . . . . . . . . . . . . . . . . . . . 22º Articulation lock standard.
PAGE 5
Capacities Load sensing hydraulics Closed Center Hydraulic System senses load requirements and maintains system pressure 350 psi (24 Bar) above the load pressure. System features industry standard control arrangement complete with low effort, feathering type, short throw levers located on a fully adjustable control pedestal. System incorporates lock valves to prevent cylinder drift under load in the following circuits: blade lift, moldboard tilt, circle shift, wheel lean and articulation.
PAGE 6
STANDARD FEATURES Volvo “High Torque” All Wheel Drive with hydrostatic Creep feature Operator controlled, lock/unlock differential final drive 4 wheel, crossover, dual braking system with reserve power assist Park brake with operator warning alarm and indicator Fully sequential, direct drive, powershift 8400 transmission, with transmission guard 13.