CONTENTS Safety Information .. Key Features Product Consistent Dimension. Specifications Application Nationalization _. Fan Control... Maintenance __ Complete Your Setup Warranty Information.
SLEETY INFORMATION ~ Plane read the manual carefully and follow the Instructions before Installing end operating the fon. The Input voltage of this fan Is 110Visc~240Vac. DO NOT use the fan under higher Input voltages. The air transferred shale not be flammables, explosive, corrosive. The environment temperature shall not exceed 40°C. Direct spraying or scanning by water or other liquid Is forbidden. This may cause short clout or strict shock. Installation on window or outdoor le forbidden.
SEER SR QUIET PWR EC MOTOR EFFICIENT AIR FLOW EC motor with PWM tuning Efficient airflow delivery provides low knolls and ‘with hydro-mechanical energy saving. stater BSDs In high static pressure [Ee] = DUAL BALL BEARINGS MULTIPLE MODES? Dual ball bearings In motor Manual, ON/OFF cycle, and provide an estimated 67,000 Intelligentsia Auto modes, quick hours partisan. Enables the and easy setup via the fan to bs mounted In any SURVIVOR Grow Hub. direction 1.
Series No. Part Quantity @ Flange 2 @ Fan Unit 1 @ Rotor Blades 1 ® Terminal Box 1 ® Bucks 2 Unit: mm Model No.
APPLICATION Ashcroft can be sod a6 an exhaust fan or an Intake fon for your grow space, snd sate hes different setup position for optimal ventilation. Exhaust fan: Hung or mounted on the highest opposite comer Inside your grow space. Airflow arrow points away from your grow space. Ir taken fan: Mounted at a bottom comer outside of your grow space. Airflow arrow points ‘toward your grow space.
INSTALLATION 1 MOUNTING AS AN INTAKE FAN STEP Unscrew and loosen the buckles on the fan unit. HYPER Remove the fen unit from the flange bracket.
INSTALLATION STEPS Dil four hole and fixed the two flans brackets on the desired position of # wood support or tu with four wood screws. For mounting on a surfaces other than wood, fx the wall anchors In the holes before screwing the wood screws to fix the flange brackets. HERS Side the fan unit back between two flanges brackets, mask sure the airflow arrow on the fan unit Is the same direction with that on the flange bracket. Then tighten the metal clamps to secure tha fan unit.
2 INSTALLATION STEP Put the buckles back on the fan unit and fix with screws. 2 HANGING AS AN EXHAUST FAN A, HANGING UPWARD Hanging Straps STEP Loop the two hanging straps around the flanges 4 shown in the diagram.
INSTALLATION STEP Slip the strap through the Inner ladder lack soot from the bottom. BYERS Pass the strap Into the outer ladder lock slot farm the top. Adjust the length of the completed loop as needed.
INSTALLATION STEPS Tuck the loose and through the canter gap of the Indexer lack to secure the lap. STERN Loop the other and of two hanging straps around apple as showed In picture. Hang the fan by tha duct flanges to secure I. Adjust the alight as beaded to fit your space.
INSTALLATION A2 Ops Hangar (soi separately} BEERY Loop the two rope hangers around the fringes as shown In the diagram. Lock the carbines to the ropes to secures the fan. EYE PR Loop the other end of the tops hangers around the crossbeam es shown In the diagram. Lack the carbines to the rope to secure tha fan to the pols. Press the yellow adjustment button to reals and lower th fan to your desired alight.
INSTALLATION B HANGING DOWNWARD 84 Hanging Straps Loop the hanging straps around the pols and the flange brackets of the fan. Adjust and taught the hanging straps, as show In part A, Steps 2-4.
INSTALLATION B.2 fops Misogamist transparently) Loop the two rape hangers around the pole and the flange bracket of the fan. Secure the two hooks to their respective ropes to hang the fan. Press the yellow button on the raps hanger to adjust the height of the fan to the desired level.
INSTALLATION 3 CONNECTING TO THE B12 CONTROLLER VOV-AZTANGV-AZTE Uses & Type-C extension cord to connect an Ashore to an E12 Controller. The controller will gt power from the duct fan.
EAN CONTROL CONTROLLED BY B42 IVEV-AZTAAISV-ALTS) Fan Speed Setting Press the "LEVEL" button to change the vow fan sped sve! from 0 to Max. The speed level will dispirit above "A" Indicates the max speed level). Long prods "LEVEL" button for 3 assonants Current speed level th quick tum off the duct tan.
MAINTENANCE Regular cleaning each oar la suggested. Marks sure to tum off power before cleaning. HAIR Unscrew and loosen the buckles on the fan unit and remove it from the flange brackets. STEP Use a damp cloth to clan tha fan blades and the Impale. Remove the wind circle In between the fan unt and Intakes flange. Clean the Inside of Intake and exhaust flanges and the wind circle.
COMPLETE YOUR SETUP LED GROW LIGHT Lighter / VS / VSX / VSF 100W-645W powerful LED grow light High PPE efficacy with Samsung LED Full spectrum included 0-100% dimming with daisy-chain -ETL/ GE / FCG certificated Compatible with Grow Hubs controller CARBON FILTER Eliminate odors and refresh sir Premium grade of Australian charcoal! High efficiency of abortion end long lifetime -4' 6 18 compatible with different Inge fans 23
WARRANTY INFORMATION WARRANTY TERM 1. We offer a 3-year warranty against manufacturing defects for all of our products from the tads of purchase. If you dean warranty assistance, please correct us as soon as possible. 2. The warranty does not cover damages dus to high moisture lava's, water damage, power surges, improper hanging/mounting, improper use, dust build-up, or users’ unauthorized modifications.
