CONTENTS Safety Information .. Key Features Product Consistent Dimension. Specifications Application Nationalization _. Fan Control. Maintenance __ Complete Your Setup Warranty Information.
SLEETY INFORMATION ~ Plane read the manual carefully and follow the Instructions before Installing end operating the fon. ~The Input voltage of this fan Is 110Vec~240Vac. DO NOT use the fon under higher Input voltages. The air transferred shale not be flammables, explosive, corrosive. The environment temperature shall not exceed 40°C. Direct spraying or scanning by water or other liquid Is forbidden. This may cause short clout or strict shock. Installation on window or outdoor le forbidden.
SEER SR QUIET PWR EC MOTOR EFFICIENT AIR FLOW EC motor with PWM tuning Efficient airflow delivery provides low knolls and ‘with hydro-mechanical energy saving. stater BSDs In high static pressure DUAL BALL BEARINGS MULTIPLE MODES? Dual ball bearings In motor Manual, ON/OFF cycle, and provide an estimated 67,000 Intelligentsia Auto modes, quick hours partisan. Enables the and easy setup via the fan to bs mounted In any SURVIVOR Grow Hub. direction. 1. Only on models of 2 Only on models of AZS6E42A.
Series No. Part Quantity @ Flange 2 @ Fan Unit 1 @ Rotor Blades 1 ® Terminal Box 1 ® Bucks 2 Unit: mm Model No.
APPLICATION Ashore can bie used as an exhaust fan or an Intake fan for your grow space, and sate has diffraction setup position for optimal ventilation. Exhaust fan: Hung or mounted on the highest opposite comer Inside your grow space. Airflow arrow points away from your grow space. Intake fan: Mourned at a bottom corner outside of your grow space. Airflow arrow points toward your grow space.
INSTALLATION 1 MOUNTING AS AN INTAKE FAN STEP Unscrew and loosen the buckles on the fan unit. BIER Remove the fan unit farm the flange bracket.
INSTALLATION STEPS Dri four holes and attach the two flange brackets on the desired position on 8 wood support or stud with four wood screws. ff you want to mount the fan on a surface other than wood, attach the wall anchors through the holes before crowing the wood screws to attach the flange bracket. HER Slide the fan ult beck between two flanges brackets, aka sure the airflow mow on the fan Fan Unit unit Is the samey direction with that on the flange bracket.
2 INSTALLATION STEP Put the buckles back on the fan unit and fix with screws. 2 HANGING AS AN EXHAUST FAN A, HANGING UPWARD Hanging Straps STEP Loop the two hanging straps around the flanges 4 shown in the diagram.
INSTALLATION STEP Slip the strap through the Inner ladder lack soot from tha bottom. REFS Pass tha strap Into the outer ladder lock slat farm the top.
INSTALLATION STEPS Tuck the loose and through the canter gap of the Indexer lack to secure the lap. STERN Loop the other and of two hanging straps around apple as showed In picture. Hang the fan by tha duct flanges to secure I. Adjust the alight as beaded to fit your space.
INSTALLATION A2 Hops Hangers fetid separately] BITER Loop the two rope hangers around tha flanges as shown In the diagram. Lock the carbines to the ropes to accursed the fan. FIEFS Loop the attar end of the tops hangers strand ; i the crossbeam es shown In the diagram. Lock the carbines to the rope to secure the fan to the pals. Crass the yellow adjustment button to tales and lower the fan to your desired height.
INSTALLATION B HANGING DOWNWARD 81 Hanging Straps Loop the hanging straps around the pole and the flange brackets of the fan. Adjust and tighten the hanging straps, as show In part A, Steps 2-4.
INSTALLATION B.2 fops Misogamist transparently) Loop the two rape hangers around the pole and the flange bracket of the fan. Secure the two hooks to their respective ropes to hang the fan. Press the yellow button on the raps hanger to adjust the height of the fan to the desired level.
INSTALLATION 3 CONNECTING TO THE B12 CONTROLLER VOV-AZBAIVEY-AZEE Uses & Type-C extension cord to connect an Ashore to an E12 Controller. The controller will gt power from the duct fan.
EAN CONTROL CONTROLLED BY B12 (VEV-AZSANVEV. A286] Fan Speed Setting Press the "LEVEL" button to change the fan sped sve! from 0 to Max. The speed level will dispirit above "A" Indicates the max speed level). Long prods "LEVEL" button for 3 assonants Current speed level th quick tum off the duct tan.
MAINTENANCE Beguiler cleaning ach year ls suggested. Make sure to tum off power before cleaning. STEP Unscrew and loosen the buckles on the fan unit and remove it from the flange brackets STEP Use a damp cloth to clean the fan blades and the Impeller. Remove the wind circle In between the fan unit and Intake flange. Clean tha Inside of Intake and exhaust flanges snd the wind circle.
COMPLETE YOUR SETUP LED GROW LIGHT Lighter / VS / VEX / VSF -100W-645W powerful LED grow light High PPE efficacy with Samsung LED Full spectrum included 0-100% dimming with daisy-chain ETL/ CE / FCC certificated Compatible with Grow Hub controller CARBON FILTER Eliminate odors and refresh air in your terr Premium grade Austrian charcoal High-efficiency absorption and & long lifespan ~Compatible with Inline fans
WARRANTY INFORMATION WARRANTY TERM 1. Wo offer a 3-year warranty against manufacturing defects for all of our products from the tads of purchase. If you naiad warranty assistance, please contact us as soon as possible. 2. The warranty does not cover damage dus to high moisture levels, water damage, power surges, improper hanging/mounting, improper use, dust build-up, or users’ unauthorized modifications. 3.