Use and Care Manual

ManualsBrandsVITAL COAT ManualsConcrete Coatings1 Gal. Clear Penetrating Water Based Concrete Masonry Sealer

X-440 PENETRATING SEALER WB

USE & CARE GUIDE

Vital Coat® is a registered trademark of NxTech Holdings LLC.

Product Name:

Vital Coat X-440 RTU & X-440C (X-440) Penetrating Water Based Concrete and Masonry Sealer

and water repellant.

Description:

Vital Coat X-440 sealer is a high performance, high solids water based low VOC Silane Siloxane

penetrating sealer and water repellent for concrete and masonry surfaces. It penetrates deep into

the surface and chemically reacts with the concrete to create a protective hydrophobic water

repellent barrier yielding a longer lasting protection against water intrusion, salts, staining,

freeze/thaw, mold and mildew, efflorescence, dusting, scaling and spalling. X-440 is a non-yellowing,

UV resistant sealer that does not leave behind a visible surface film, and will not change the look or

color of the surface preserving the natural characteristics of the treated substrates.

X-440 Penetrating Sealer can be applied to residential and commercial, interior or exterior,

horizontal or vertical structures. It protects concrete and masonry surfaces including architectural

concrete, concrete block, split-face block, pavers, stucco, porous and dense brick, clay tile, etc. It is

also an excellent choice for high-traffic areas because it does not create a slippery film on top of the

surface. X-440 helps protect your concrete and masonry surfaces to resist common issues such as

staining, cracking and other damages caused by intrusion of water.

Recommended Uses

Approximate Coverage

Approximate Coverage rate is approximately 150 - 250 ft.2 /gal. (1.2 - 6.1 m2 /L). Coverage is

approximate and may vary depending on surface finish/texture, concrete condition, climatic

conditions, etc. Always apply to a test area first to determine actual coverage rate before full-scale

application.

Easily applied with a pump sprayer, roller, or brush.

X-440 Benefits

 Provides superior water repellency, while allowing surface to breathe.

 Does not change the appearance of the substrate.

 No slippery film is formed on the substrate.

 Works on new or existing structures.

 Provides a protective hydrophobic barrier to prevent water penetration.

 Reduces deterioration from spalling and pitting because of exposure to salts and chlorides.

 Concrete Pavers

 Block Walls

 Chimneys

 Natural Stone

 Driveways

 Patios

 Pool decking

 Retaining Walls

 Warehouse Floors

 Stucco

 Aggregate

 Mortar and Grout

Summary of content (3 pages)

PAGE 1
X-440 PENETRATING SEALER WB USE & CARE GUIDE Product Name: Vital Coat X-440 RTU & X-440C (X-440) Penetrating Water Based Concrete and Masonry Sealer and water repellant. Description: Vital Coat X-440 sealer is a high performance, high solids water based low VOC Silane Siloxane penetrating sealer and water repellent for concrete and masonry surfaces.
PAGE 2
X-440 PENETRATING SEALER WB USE & CARE GUIDE           Will Preserve the natural, unsealed look and feel of the substrate Efflorescence and strong alkali resistance. Water Based and VOC Compliant Long Lasting up to 5 Years. Reduces chloride penetration UV resistant Alkali resistant Freeze/Thaw/De-icing salt resistant. Provides excellent resistance to mold, mildew, and fungus Reduces dirt pick-up Packaging It is available in 1 Gallon (3.79 Liter) jugs, 5 Gallon (18.
PAGE 3
X-440 PENETRATING SEALER WB USE & CARE GUIDE themselves the suitability of this product for the intended use. Allow 14 - 28 days for new concrete or masonry to cure before applying X-440. Application X-440 can be sprayed, brushed or rolled. For best results, using a quality sprayer capable of a producing a steady pressure under 40 psi. A .1 - .2 GPM tip is recommended. Completely saturate the surface ensuring that the entire surface is saturated.