TDS

Odor
X-440 Penetrating Sealer can be applied to residential and commercial, interior or exterior, horizontal or vertical structures. It protects
concrete and masonry surfaces including architectural concrete, concrete block, split-face block, pavers, stucco, porous and dense
brick, clay tile, etc. It is also an excellent choice for high-traffic areas because it does not create a slippery film on top of the surface. X-
440 helps protect your concrete and masonry surfaces to resist common issues such as staining, cracking, spalling, efflorescence, and
other damages caused by intrusion of water.
Features/Benefits
Technical Information
*Provides a hydrophobic barrier to prevent water penetration
*UV resistant
Result
Property
Solids
5% 10%
Application Temperature
Flashpoint
VOC Content +/-2%
Dry for Traffic
Milky White Emulsion - Dries Flat/Clear
Dry to Touch
Mild
50°F - 90°F
999°F
<30g/L
2 hours
Coverage rate is approximately 150 - 250 ft.2 /gal. (1.2 - 6.1 m2 /L). Coverage is approximate and may vary depending on surface
finish/texture, concrete condition, climatic conditions, etc. Always apply to a test area first to determine actual coverage rate before full-
scale application.
Coverage
Packaging
It is available in 1 Gallon (3.79 Liter) jugs, 5 Gallon (18.93 Liter) Pails, 55 Gallon (208.20 Liter) Drums, and 275 Gallon (1041 Liters)
Totes. Delivery Restrictions May Apply. See shipping terms in terms and conditions. Other quantities available upon request.
8 to 10 hours
®
Description
Primary Applications
Vital Coat X-440 sealer is a high performance, high solids water based low VOC Silane Siloxane penetrating sealer and water repellent
for concrete and masonry surfaces. It penetrates deep into the surface and chemically reacts with the concrete to create a protective
hydrophobic water repellant barrier yielding a longer lasting protection against water intrusion, salts, staining, freeze/thaw, mold and
mildew, efflorescence, dusting, scaling and spalling. X-440 is a non-yellowing, UV resistant sealer that does not leave behind a visible
surface film, and will not change the look or color of the surface. It will preserve the natural characteristics of the treated substrates.
Appearance
Vital Coat
X-440 RTU Concrete Masonry Sealer
Technical Data Sheet (TDS)
*Does not change appearance of Substrate
*Provides superior water repellency while allowing substrate to breath
*Reduces deterioration from spalling due to salt exposure
*Excellent resistance to mold and mildew
*No slippery film is formed
*Works on new or existing structures
*Reduces chloride penetration
*Reduces dirt pick-up
* Freeze/Thaw/de-icing salt resistant
*Efflorescence and strong alkali resistance
pH
9-Jun
Shelf Life
This product has a shelf life of up to two years in its original, sealed, unopened container. If product appears to be hardened or
separated contact Vital Coat before use.