User's Manual

3
GENERAL SAFETY PRECAUTIONS
• Ensure you read the following instructions carefully.
• Follow all the warnings and instructions shown on the products. The International
Electrical Symbols used on the device and in this notice are explained in table 1 at the
end of this document.
• Disconnect the equipment from the wall socket before cleaning. Do not use cleaning
fluids or aerosols. Use a slightly damp cloth for cleaning.
•
This equipment must only be used with the battery and mains adapter supplied by
us.
• These instructions contain information and warnings which must be followed by the
user to ensure the equipment is used and maintained safely.
• Equipment category II: 400V overvoltage class II (IEC61010-1 electrical safety).
• Pollution level 2: non conducting pollution with occasional temporary conductivity
caused by condensation (IEC61010-1 electrical safety).
IMPORTANT
To avoid the risk of electrocution:
• Live components are accessible when the equipment is open. The unit must be
disconnected from the power source before any operation or repair inside the
unit.
• Do not use the equipment if the unit or the connections are damaged.
• The battery access cover must be locked during use.
• Do not use the equipment in the rain.
• Any operation other than replacement of the battery must be carried out by an
after sales service technician who is qualified to do so and knows the risks
involved.