User's Manual
Table Of Contents
- 1. Introduction
- 2. Operating the PowerMaster 360 System
- Basic Arming and Disarming
- Preparing to Arm
- Arming ‘AWAY' / ‘HOME'
- Disarming and Stopping Alarm
- Disarming under Duress
- Partition Selection Process
- Switching from ‘HOME’ to ‘AWAY’
- Switching from ‘AWAY’ to ‘HOME’
- Arming AWAY or HOME ‘Instant’
- Forced Arming AWAY or HOME
- Arming in the Latchkey Mode
- Initiating Panic Alarm
- Initiating Fire Alarm0F or Emergency Alarm
- Chime ON/OFF
- 3. Reviewing Troubles and Alarm memory
- 4. Menus and Functions
- A.1 Entering the User Settings Menu & Selecting a Setting Option
- A.2 Returning to the Previous Step or Exiting the USER SETTINGS Menu
- A.3 Buttons used for Navigation & Setting
- B.1 Setting the Zone Bypass Scheme
- B.2 Reviewing the Zone Bypass Scheme
- B.3 Recalling the Zone Bypass Scheme
- B.4 Programming User Codes
- B.5 Programming the Duress Code
- B.6 Add / Delete Proximity Tags
- B.7 Add / Delete Keyfob Transmitters
- B.8 Setting the Time & Time Format
- B.9 Setting the Date & Date Format
- B.10 Enabling / Disabling Auto-Arming
- B.11 Setting the Auto-Arming Time
- B.12 Programming Email, MMS and SMS Reporting
- B.13 Enabling / Disabling the Squawk Option
- B.14 Serial Number
- B.15 PowerLink Parameters4F
- 5. Event Reporting and Control by SMS
- 6. Special Applications and Functions
- 7. Testing the System
- 8. Maintenance
- APPENDIX A. FUNCTIONS OF CONTROLLING DEVICES
- APPENDIX B. PARTITIONING
- APPENDIX C. GLOSSARY
- APPENDIX D. HOME FIRE ESCAPE PLANNING
- APPENDIX E. SPECIFICATIONS
- E1. Functional
- E2. Wireless
- E3. Electrical
- E4. Communication
- E5. Physical Properties
- E6. Peripherals and Accessory Devices
- APPENDIX F. COMPLIANCE WITH STANDARDS
MENUS AND FUNCTIONS
D-305736 PowerMaster 360 User's Guide 17
C. User Settings Options Menu
Click until the display reads the desired setting option and then press .
SET ZONE BYPASS
Use to set the Zone Bypass Scheme i.e. to bypass (exclude) faulty or unsecured
("disturbed") zones, or to clear a bypassed zone (unbypass). For further details and
programming procedure see section B.1.
3
REVIEW BYPASS
Use to quickly review the Bypass Scheme i.e. which zones are bypassed. For
further details and reviewing procedure see section B.2.
3
RECALL BYPASS
Use to Recall the last used bypassed scheme for reuse in next arming period. For
further details and recalling procedure see section B.3.
3
USER CODES
Use to program your Master User secret access code and the seven codes of the
other users. For further details and programming procedure see section B.4.
DURESS CODE
Use to program the Duress (ambush) code. For further details and programming
procedure see section B.5.
PROXIMITY TAGS
Use to add new Proximity Tags to or to delete Proximity Tags when lost. For further
details and programming procedure see section B.6.
KEYFOBS
Use to add new Keyfob Transmitters or to delete Keyfob Transmitters when lost.
For further details and programming procedure see section B.7.
TIME & FORMAT
Use to set the time clock to show the correct time and time format. For further
details and programming procedure see section B.8.
DATE & FORMAT
Use to set the calendar date to show the correct date and date format. For further
details and programming procedure see section B.9.
AUTO-ARM ENABLE
Use to enable or disable the Automatic Daily Arming option at predefined times
(see Auto-Arm Time setting). For further details and programming procedure see
section B.10.
AUTO-ARM TIME
Use to set the predetermined time for the Automatic Daily Arming if enabled (see
Auto-Arm Enable setting). For further details and programming procedure see
section B.11.
PRIVATE REPORT
Use to program the four private telephone numbers for reporting alarm and other
event messages to private subscribers. For further details and programming
procedure see section B.12.
SQUAWK
Use to enable or disable the squawk sound i.e. arm / disarm feedback indication.
For further details and programming procedure see section B.13.
SERIAL NUMBER
Use to read the system serial number and similar data
see section B.14.
PLNK curr.params
Use to read the current IP address of the PowerLink and similar data see section
B.15.
<OK> TO EXIT
Use to exit from the “USER SETTINGS” menu back to Main Menu. For further
details see section A.2.
Returns to
first option