User Guide

EVENT REPORTING & CONTROL BY TELEPHONE AND SMS
D-307074 PowerMaster-10/30 G2 User's Guide 35
B.12 Programming Private Phone, Email, MMS and SMS Reporting
The PowerMaster system can be programmed to send various event notification messages such as alarm,
arming or trouble events, to 4 private telephone subscribers by audible signal and, if a GSM option is installed,
also to 4 SMS telephone numbers. In addition, for users who are connected to the PowerManage server, event
notification messages can be sent to 4 private emails as well as to 4 private MMS and SMS telephone numbers
via the server. These reports can be programmed either instead of or in addition to the reports transmitted to
the monitoring company. Further details about the event notification by telephone and by SMS are provided in
Chapter 7. Event Reporting and Control by Telephone and SMS.
You can also determine the number of times the private telephone number is dialed and whether a single
acknowledge signal will stop the reporting process or an acknowledge signal from each telephone will be
required before the current event is considered reported.
Here you can program:
 The specific events you wish the system to report.
 The 1
st
, 2
nd
, 3
rd
, and 4
th
private telephone, MMS, SMS numbers and emails for reporting alarm and other
event messages to private subscribers.
 The number of redial attempts, two-way voice communication

, and whether to use a single acknowledge
signal or an acknowledge signal from each telephone before the current event is considered reported.
 The SMS permission type, whether to accept SMS commands only from the four phone numbers
configured in the system or from any number.
Notes: The notification of events to other 3rd party applications (SMS/IP/personal phones) is a supplementary
feature that has not been investigated by UL and is not used in UL listed installations.

Carefully read the section titled "Additional Information" according to the indicated references
1
etc. – see
table at end of this section.
VOICE REPORT
A. To Program Events to be Reported to private telephone
1.
PRIVATE REPORT
Enter the [USER SETTINGS] menu and select the [PRIVATE REPORT]
option and press .
1
2.
VOICE REPORT
The display will read [VOICE REPORT]. To enter this option press .
3.
REPORTED EVENTS
When the display reads [REPORTED EVENTS] press .
2
disable report 
The display shows the currently selected option.
4.
or
Click the or button until the display reads the event group
you wish to be reported via private phones, for example, [alarms].
3
alarms
5.
When you are satisfied with the setting, press to confirm.
alarms 
A "Success Tune" ☺ sounds. The display confirms the set events to be
reported, and returns to step 3.
5, 15
☺ Return to step 3

Refers to PowerMaster-30 G2 with voice option only