Visioneer OneTouch 9120 USB Scanner Installation Guide FOR WINDOWS
COPYRIGHT INFORMATION Copyright © 2003 Visioneer, Inc. Reproduction, adaptation, or translation without prior written permission is prohibited, except as allowed under the copyright laws. The Visioneer brand name and logo are registered trademarks of Visioneer, Inc. The PaperPort brand name and logo are registered trademarks of ScanSoft, Inc. Microsoft is a U.S. registered trademark of Microsoft Corporation. Windows is a trademark of Microsoft Corporation.
i TA B L E O F C O N T E N T S Welcome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 What’s in the Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 The Visioneer 9120 USB Scanner . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 What You Need . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ii Adjusting the Brightness and Contrast . . . . . . . . . . . . . . . . . . . . 47 Adjusting Gamma, Saturation, and Color Hue . . . . . . . . . . . . . 49 Adjusting Output Size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51 Saving a Custom Size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54 The Scan Info Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55 Zooming In and Out . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
WELCOME Congratulations on purchasing your Visioneer OneTouch 9120 USB scanner. With this scanner you can quickly scan paper documents, color photos, 35mm slides, and negatives to place their electronic images on your computer. WHAT’S IN THE BOX Before starting the installation, check the contents of the box to make sure that all parts are included. If any items are missing or damaged, contact the dealer where you purchased the scanner.
2 VISIONEER ONETOUCH 9120 USB SCANNER INSTALLATION GUIDE THE VISIONEER 9120 USB SCANNER Document cover Transparency light source Glass Reference marks OneTouch buttons panel Status light OneTouch buttons Custom Print Email OCR To PaperPort USB port Option port TPA cable Power jack
THE VISIONEER 9120 USB SCANNER 3 Document cover—Protects the document from light and contamination. Transparency light source—Shines light through 35mm slide or negative transparency and then through the glass onto the scanning sensors in the body of the scanner. Glass—Items are placed face down aligned at the arrow symbol in the upper-left corner. Reference marks—Marks on the border of the glass show where to align various paper sizes. OneTouch button panel—Allows scanning directly from the scanner.
4 VISIONEER ONETOUCH 9120 USB SCANNER INSTALLATION GUIDE WHAT YOU NEED An IBM-compatible Pentium PC with: ■ A CD-ROM drive ■ An available Universal Serial Bus (USB) port; 1.1 or 2.0 ■ Microsoft Windows operating system: 98SE, 2000, ME, or XP ■ Available internal memory (RAM) as follows: ■ ■ 64 MB or more ■ 128 MB recommended for Windows XP 200 MB of free hard disk space Note: The new USB 2.0 ports operate at higher speeds than USB 1.1 ports. If your computer is not equipped with USB 2.
DOCUMENTATION 5 DOCUMENTATION Your scanner is delivered with the following documentation: ■ Quick Install Card—abbreviated installation instructions. ■ Visioneer OneTouch 9120 Scanner Installation Guide—detailed installation, scanning, configuration, and maintenance information. ■ ScanSoft PaperPort User’s Guide—on the Installation CD; contains detailed feature and configuration information. ■ Online Help—for the OneTouch scanner, Visioneer Scan Manager Pro, and PaperPort software applications.
6 VISIONEER ONETOUCH 9120 USB SCANNER INSTALLATION GUIDE Installing Installation is a quick, three-step process: ■ Install the software ■ Connect the scanner ■ Check out your scanner STEP 1: INSTALL THE SOFTWARE Note: You must install the PaperPort software before connecting the scanner to the computer. Otherwise the correct software to run your scanner will not be installed and it may not scan properly. To install the software: 1.
STEP 1: INSTALL THE SOFTWARE 7 3. On the installation menu, select Install Products. The next installation screen appears. 4. Select ScanSoft PaperPort/Scanner Driver. Installation of the software begins. If a message asks you to restart your computer, click Restart. 5. On the PaperPort 8.0 SE Setup window, click Next. Installing PaperPort 8.0 SE will uninstall any previous, existing version of PaperPort and install PaperPort 8.0 SE while retaining all your PaperPort files.
8 VISIONEER ONETOUCH 9120 USB SCANNER INSTALLATION GUIDE 6. On the License Agreement window, read the ScanSoft license agreement. If you accept the terms, select I accept the terms in the license agreement, and then click Next. 7. On the User Information window, accept the current information or enter new information, and then click Next. 8. On the Setup Type window, click Next. 9. Click Install to begin the installation. 10.
STEP 2: CONNECT THE SCANNER 9 STEP 2: CONNECT THE SCANNER Your OneTouch 9120 scanner connects to any available USB 1.1 or USB 2.0 port. Check your computer’s user guide for port locations. Note: You do not have to shut off the power to your computer when connecting the scanner to a USB port. To connect the scanner to a USB 1.1 or USB 2.0 port: 1. Remove all shipping tape from the top and bottom of the scanner. Slide the locking tab on the bottom to its unlocked position.
10 VISIONEER ONETOUCH 9120 USB SCANNER INSTALLATION GUIDE 3. Plug one end of the USB cable into an available USB 1.1 or USB 2.0 port on the computer. 4. Plug the other end of the USB cable into the scanner’s USB port. USB If the plug does not attach easily, make sure that you are plugging it in correctly. Do not force the plug into the connection. Some computers have keyboards with USB ports. You can plug the cable into the keyboard instead of the USB port on the computer. 5.
STEP 2: CONNECT THE SCANNER 11 The status light on the front of the scanner is illuminated, indicating the scanner is receiving power. Status light Your computer recognizes that a scanner has been plugged into the USB port and automatically loads the appropriate software from the CD to run the scanner. Note: If your computer is running Windows XP, you may see messages about using a USB 2.0 connection for the scanner. If your computer does not have USB 2.0 ports, disregard the messages. 6.
12 VISIONEER ONETOUCH 9120 USB SCANNER INSTALLATION GUIDE 7. Complete the required information, and then click Register. The registration serial number for your scanner is located on the underside of the scanner body. Serial Number 8. On the Install Completed window, click Finish. Your scanner is now ready to scan. 9. Before proceeding to “Step 3: Check Out Your Scanner”, you can install additional software from the installation CD, or view and print the scanner and PaperPort documentation.
STEP 3: CHECK OUT YOUR SCANNER 13 To check the status of the scanner: 1. On the Windows taskbar, right-click the scanner icon. The shortcut menu appears. 2. Select About from the shortcut menu. A dialog box confirms the scanner is properly connected. 3. Click OK to close the dialog box. Your scanner is ready to scan. IF THE SCANNER IS NOT PROPERLY CONNECTED If the scanner icon on the Windows taskbar has a red “X” through it, the scanner is not properly connected.
14 VISIONEER ONETOUCH 9120 USB SCANNER INSTALLATION GUIDE • Is the scanner’s locking tab in the locked position? Slide the locking tab to the unlocked position. If you tried to scan with the scanner locked, you must restart your computer after unlocking the scanner. • Did you restart the computer after installing the software? If you didn’t restart the computer, it may not have loaded all of the software files. Try restarting your computer.
STEP 3: CHECK OUT YOUR SCANNER 15 If you try all the troubleshooting procedures described above and in the Readme file, and the scanner icon still has a red X through it, you may have a malfunctioning scanner. Please see “Visioneer 9120 USB Scanner Specifications” on page 63. Also visit our Web site at www.visioneer.com for additional technical information. You can also receive software updates from the Web site.
16 VISIONEER ONETOUCH 9120 USB SCANNER INSTALLATION GUIDE Scanning This chapter describes how to scan paper documents as well as 35mm slides and negatives. There are three ways to scan a paper item: ■ Press a OneTouch button on the scanner ■ Click a button on the button panel ■ Click a button from the PaperPort software Note: To scan transparencies you must scan from PaperPort (or other TWAIN software). See “Scanning 35mm Slides and Negatives” on page 25 for details.
PRESSING A ONETOUCH BUTTON ON THE SCANNER 17 2. Close the document cover and press one of the OneTouch buttons. The scanner starts scanning the item. Messages just above the Windows taskbar show the status of the scanning process. During scanning, the scan progress window shows a copy of the image, as illustrated here. When the scan is complete, the scanned image appears in the destination application. In this example, the destination application is the PaperPort desktop.
18 VISIONEER ONETOUCH 9120 USB SCANNER INSTALLATION GUIDE ABOUT THE ONETOUCH BUTTONS The OneTouch buttons are preconfigured for typical scanning tasks. To change button settings, see “Configuring the Buttons” on page 32. The following table describes the preconfigured button settings: Button Function Preconfigured Settings Scan Scans the item as a color page and displays it in PaperPort. Email Scans the item as a color photo and attaches it to a new email message in your email application.
SCANNING FROM THE BUTTON PANEL ON THE SCREEN 19 SCANNING FROM THE BUTTON PANEL ON THE SCREEN Scanning from the button panel on the screen works just like pressing a scanner button. The scanner scans the item, and then sends the image to the destination associated with the button. This method of scanning is especially helpful if the scanner is not located close to your computer. To scan from the button panel on the screen: 1. Place an item face down on the glass.
20 VISIONEER ONETOUCH 9120 USB SCANNER INSTALLATION GUIDE SCANNING FROM THE PAPERPORT SOFTWARE Instead of using a scanner button, you can scan directly from the PaperPort software. To scan a transparency you must scan from the PaperPort software or other TWAIN software, refer to “Scanning 35mm Slides and Negatives” on page 25. You can also scan directly with other software that meets the TWAIN standards for scanning, which includes many graphics and imaging applications.
SCANNING FROM THE PAPERPORT SOFTWARE 21 2. On the Windows taskbar, click Start, point to Programs, point to ScanSoft PaperPort 8.0, and then click PaperPort. The PaperPort desktop opens. 3. Click the Scan icon on the PaperPort command bar. The Folders pane is replaced by the Scan pane. 4. From the Scanner list, select Visioneer Scan Manager Pro. 5. In the “Scan what?” section, choose Document or Photograph. 6.
22 VISIONEER ONETOUCH 9120 USB SCANNER INSTALLATION GUIDE Choose a scanning option. Scan Reflective Using is for scanning paper items. The other options are for transparencies. Click an icon to select a configuration—Color, Grey Scale, or Black&White. Clicking the “+” sign in front of Custom shows Custom’s scan settings. Click a setting in the list to change it. The setting’s options appear on the right side of the Scan Manager Pro where you can make changes if necessary.
SCANNING FROM THE PAPERPORT SOFTWARE 23 The scanner then uses those settings and the preset resolution you selected for the type of image to produce the optimal scanned image. See “Setting Scan Manager Pro Preferences” on page 56 to set the resolution for the type of AutoScan image. The Scanning dialog box opens while the scan is in progress. Check marks indicate the completion of a processing step. The image appears as a thumbnail on the PaperPort desktop.
24 VISIONEER ONETOUCH 9120 USB SCANNER INSTALLATION GUIDE To scan by previewing and adjusting settings: 1. On the left side of the Scan Manager Pro, select a configuration. For example, select Color Configurations and then select Custom to scan a color item with the preset Custom scan settings. The configuration settings appear as a list. Click the + (plus) sign to see the full list. Click the - (minus) sign to collapse the list. 2. Click the Preview button to preview the image before scanning. 3.
SCANNING FROM THE PAPERPORT SOFTWARE 25 SCANNING 35MM SLIDES AND NEGATIVES Your 9120 OneTouch scanner is specially designed to scan 35mm slides and negatives. You can scan both positive and negative film images. A BRIEF EXPLANATION Your scanner has sensors that capture the image of the item being scanned. Those sensors are located in the body of the scanner.
26 VISIONEER ONETOUCH 9120 USB SCANNER INSTALLATION GUIDE 2. To scan a 35mm slide, first position the 35mm mask on the glass. The mask has one square corner. Align that corner with the arrow on the scanner body. Make sure that the text on the 35mm mask faces up so the slide fits properly in the mask. Follow the directions on the mask and place the 35mm slide horizontally into the slide holder. Calibration slot Notice that the mask has a narrow slot next to the slide holder.
SCANNING FROM THE PAPERPORT SOFTWARE 27 The 35mm negative mask also has a calibration slot. Do not place items to be scanned in the calibration slot. You’re now ready to scan the slide or negative. To scan a 35mm slide or negative: 1. Start the PaperPort software and click the Scan icon on the toolbar. The Folders pane (which shows folders for organizing your scanned images) is replaced by the Scan pane. 2. From the Scanner drop-down list, select Scan Manager Pro, if it is not already selected. 3.
28 VISIONEER ONETOUCH 9120 USB SCANNER INSTALLATION GUIDE Choose a transparency scanning option: Scan 35mm Using: for 35mm slides Scan Negative Using: for negatives 7. Click Preview to preview the image and adjust settings as needed. 8. See “Adjusting the Settings in the Scan Manager Pro” on page 44 for details about adjusting settings. Tip: Set the resolution to 1200 dpi or better, Visioneer recommends using a resolution of 2700 dpi.
SCANNING FROM THE PAPERPORT SOFTWARE 29 SCANNING FROM A COMPUTER RUNNING WINDOWS XP OR ME If your computer is running the Windows XP or ME operating system, you have a choice of scanning using the TWAIN-compliant Visioneer Scan Manager Pro software as just described (see page 20) or scanning using the Microsoft Windows Image Acquisition (WIA) standard as described below. Note: To scan transparencies you must scan from PaperPort (or other TWAIN software).
30 VISIONEER ONETOUCH 9120 USB SCANNER INSTALLATION GUIDE 8. Select the button most appropriate for the item you’re scanning. To scan with the Custom Settings option see the next section, “Fine Tuning Your Scans”. 9. Click Preview to preview the image before scanning. The image is displayed on the right side of the window. 10. Adjust the settings of the previewed image as desired: ■ Change the button selection for the type of item. ■ Adjust the custom settings. ■ Change the size of the scanned image.
SCANNING FROM THE PAPERPORT SOFTWARE 31 FINE TUNING YOUR SCANS You can select new settings before scanning to adjust how you want to scan a particular item. To select the scanner settings before you scan: 1. On the Scan using Visioneer 9120 Scanner window, select the Custom Settings button, and then click Adjust the quality of the scanned picture. The Advanced Properties dialog box opens. 2. Select the options for scanning.
32 VISIONEER ONETOUCH 9120 USB SCANNER INSTALLATION GUIDE Configuring You can configure the default scanning settings for: ■ The buttons on the scanner and the button panel ■ The Visioneer Scan Manager Pro application (used when scanning from the PaperPort software) CONFIGURING THE BUTTONS When you first connect your scanner to a computer, the scanner’s software configures each OneTouch button with appropriate settings.
CONFIGURING THE BUTTONS 33 To open the Configuration dialog box from the button panel: 1. Click the scanner icon on the right side of the Windows taskbar. 2. On the button panel, right-click the button you want to configure. The Configuration dialog box opens. The tab for the scan button you clicked is selected. ABOUT THE CONFIGURATION DIALOG BOX The tabs across the top of the Configuration dialog box correspond to the buttons on the scanner and the button panel.
34 VISIONEER ONETOUCH 9120 USB SCANNER INSTALLATION GUIDE The options on the Configuration dialog box are: Select Destination—The list of applications that can open to display the scanned image. Select the application that you want to automatically open to display or process the scanned image. Select Configuration—The list of the available scan configurations. The configuration settings include: color, black and white, or grayscale, resolution in dots per inch (dpi), page size, brightness, and contrast.
CONFIGURING THE BUTTONS 35 SELECTING NEW OPTIONS FOR THE BUTTONS You can select a new destination application, configuration, and image format to optimize a scanner button for the type of scanning you want to do. Use the Configuration dialog box to select new options. To select new options for a scanner button: 1. Open the Configuration dialog box and click the tab of the button whose options you want to change. 2.
36 VISIONEER ONETOUCH 9120 USB SCANNER INSTALLATION GUIDE CREATING NEW CONFIGURATIONS You cannot change settings of the preset (default) configurations. If you want to scan with settings other than those in the preset configurations, create a new configuration. You can do this either by copying a preset configuration and making the desired changes or by creating a new configuration from scratch. The new configuration is saved in the Select Configuration list so you can use it again.
CONFIGURING THE BUTTONS 37 6. On the Scan Settings tab, set the scan settings as required. Mode—Select Black/White to scan in black and white. For example, letters and memos are usually scanned in black and white. Select Grayscale to scan items such as documents containing drawings or black and white photographs. The scanning produces an image in varying shades of gray. Select Color to scan color photographs and other color items.
38 VISIONEER ONETOUCH 9120 USB SCANNER INSTALLATION GUIDE the size of the photo. When AutoCrop is selected, the scanner makes two passes—the first to sense the item’s size, and the second to scan the image. This option overrides the Page Size selection. DeScreen—Select this option when scanning a picture from a newspaper or magazine article, or other items that contains images with patterns or dots. Scans of patterns or dots sometimes have a distorted or wavy appearance.
CONFIGURING THE BUTTONS 39 ADJUSTING SCAN SETTINGS AND PAGE SETTINGS When scanning using a configuration you created yourself, you can adjust scan settings and page settings. For example, if the scanned image is too dark, you can adjust the brightness of the scan setting. Note: You cannot change the scan settings or page settings for any of the predefined scan configurations. You can only adjust settings for scan configurations that you create yourself. To adjust the scan settings and page settings: 1.
40 VISIONEER ONETOUCH 9120 USB SCANNER INSTALLATION GUIDE The Edit Scan Configuration dialog box opens. 3. On the Scan Settings tab, adjust scan settings as required. 4. Click the Page Settings tab and adjust page settings as required. 5. When finished, click OK. 6. On the Configuration dialog box, click OK to save and apply the changes to the button. Note: If you selected the Copy/Print button, the Edit Scan Configuration dialog box will have a Device tab for selecting options for a printer or copier.
CONFIGURING THE BUTTONS 41 SETTING PREFERENCES The preference settings are applied to each button and the scanner. To set preferences: 1. On the Configuration dialog box, select the tab for a button to set its preferences. 2. Click the Preferences tab on the Configuration dialog box. Preferences tab The OneTouch Preferences dialog box opens. The Button tab of the dialog box shows which button you selected for new preferences. The name of the button to receive new preferences 3.
42 VISIONEER ONETOUCH 9120 USB SCANNER INSTALLATION GUIDE button are usually email applications. By selecting the Show All Destinations option as the preference for the email button, all the other types of applications are included in the list of email destination applications. Select Destinations—Select this option to individually choose the types of applications to include in the button’s list of destination applications. Click in the boxes for the types of applications to include in the button’s list.
CONFIGURING THE BUTTONS 43 Show Scanner Icon in Windows Taskbar—Select this option to see the small icon representing the OneTouch scanner in the Windows taskbar. Scanner icon Scanner Lamp turns off—These options control when the scanner lamp powers goes off. ■ After idling for xx minutes—Select this option to automatically turn off the lamp if the scanner hasn’t been used for the specified time. This option saves energy and extends the lamp’s life.
44 VISIONEER ONETOUCH 9120 USB SCANNER INSTALLATION GUIDE ADJUSTING THE SETTINGS IN THE SCAN MANAGER PRO You can adjust the scan settings on the Visioneer Scan Manager Pro desktop to produce the best possible image for your needs. To adjust a setting: 1. Open the PaperPort desktop and then click the Scan icon to open the Scan Manager Pro. 2. On the left side of the Scan Manager Pro, select a configuration, for example, Color Configurations. 3.
ADJUSTING THE SETTINGS IN THE SCAN MANAGER PRO 45 The following figure shows an example of the Scan Manager Pro if you click the Resolution setting in the list, or click the Resolution and Sharpen button. Click to close the settings panel Note: The information in the scan settings list and the options you select on the various settings panels are interactive. As you change the settings on the panel, the numbers in the list on the left also change.
46 VISIONEER ONETOUCH 9120 USB SCANNER INSTALLATION GUIDE The following figure shows the resolution and sharpen options: Reminder: The location of various buttons on the panels may be slightly different on your Scan Manager Pro window. The appearance of the window depends on your monitor’s screen resolution. To adjust the resolution and sharpness: 1. To use one of the preset resolutions for typical scanned items, click one of the options in the list.
ADJUSTING THE SETTINGS IN THE SCAN MANAGER PRO 47 4. To return the settings to their original amounts, click Reset. The resolution and sharpen panel also includes an advanced setting for Moire patterns. Moire patterns are wavy, rippled lines that sometimes appear on the scanned images of photographs or illustrations, particularly newspaper and magazine illustrations. To scan the image and limit or eliminate moire patterns, select the Reduce Moire option.
48 VISIONEER ONETOUCH 9120 USB SCANNER INSTALLATION GUIDE To adjust the brightness and contrast: 1. Drag the Brightness slider to the left to make the item darker or to the right to make the item lighter. You can also type a number directly into the brightness setting box, or click the up and down arrows next to the box to increase or decrease the setting. 2. Drag the Contrast slider to the left to decrease the contrast or to the right to increase the contrast.
ADJUSTING THE SETTINGS IN THE SCAN MANAGER PRO 49 4. Click Adjust. The image changes to show your new settings. If the image is not what you want, click Reset to return the image to its original brightness and contrast. ADJUSTING GAMMA, SATURATION, AND COLOR HUE If you’re using the Color Configuration to scan, you can adjust a group of color settings.
50 VISIONEER ONETOUCH 9120 USB SCANNER INSTALLATION GUIDE To adjust the color settings: 1. From the Channel drop-down menu, choose the individual color (Red, Green, or Blue) that you want to use as the basis for adjusting the image, or choose All to adjust them together. 2. From the Edit Style drop-down menu, choose the type of color editing that you want to use: ■ Gamma—The response curve changes as you change the gamma setting; you can also change the saturation and hue settings.
ADJUSTING THE SETTINGS IN THE SCAN MANAGER PRO 51 ADJUSTING OUTPUT SIZE The item you’re scanning may not fill the scanner glass. In that case you can preview the item and use the Auto Trim option to automatically eliminate the unwanted sections of the image. You can also adjust the output size to scan only specific sections of an image. For example, if you’re scanning a photograph and want to focus on one section, adjusting the output size removes the rest of the photograph from the final scanned image.
52 VISIONEER ONETOUCH 9120 USB SCANNER INSTALLATION GUIDE 2. If the dotted line is not exactly where you want it, put the pointer on the line and drag the mouse. For example, if you want the scan to include a border around the image, you can drag the dotted line to be slightly larger than the autotrimmed area. To use the pointer to drag the line, make sure the pointer button is selected at the top of the window. 3. When the trimmed area is what you want, click Scan.
ADJUSTING THE SETTINGS IN THE SCAN MANAGER PRO 53 A new Scan Info box on the lower left portion of the Scan Manager Pro shows the information for the new area. You can select multiple areas. A Scan Info box opens for each one. The following figure shows an example of a manually selected area. Note: When you manually select an area, the settings on the other panels are for that selected area, not the whole image.
54 VISIONEER ONETOUCH 9120 USB SCANNER INSTALLATION GUIDE 6. To maintain the selected area’s length-to-width relationship (known as the aspect ratio), click Maintain Aspect. Note that as you rotate the area or maintain its aspect ratio, the width and height measurements change to reflect the new orientation of the image. 7. When the settings are what you want, click Scan. 8. If you want to remove the selected area and start over, click Remove on the Scan Info box.
ADJUSTING THE SETTINGS IN THE SCAN MANAGER PRO 55 THE SCAN INFO BOX The following figure shows the information on the Scan Info box: Physical size of the image to scan. Location of the top left corner of the image in the Preview window. Current location of the pointer as you drag it on the Preview window. Size of the file of the scanned image The space on your computer’s hard drive. ZOOMING IN AND OUT Enlarge or reduce the preview image by zooming in or out. To enlarge and reduce the preview image: 1.
56 VISIONEER ONETOUCH 9120 USB SCANNER INSTALLATION GUIDE SETTING SCAN MANAGER PRO PREFERENCES You can set preferences for the Scan Manager Pro and scanner that are independent of the preferences for the PaperPort software. To set the Scan Manager Pro preferences: 1. Click the Preferences button. The User Preferences dialog box opens. 2.
ADJUSTING THE SETTINGS IN THE SCAN MANAGER PRO 57 ■ Show standard metric paper sizes—Select this option if you use metric paper to print images. When you select the scan size output options, the width and height dimensions are then for metric paper sizes. ■ Show standard US paper sizes—Select this option to set the paper sizes for standard US paper. ■ Units—Select the measurement units for the ruler around the preview window. The x and y coordinates of the pointer position are relative to the units.
58 VISIONEER ONETOUCH 9120 USB SCANNER INSTALLATION GUIDE The Save Profile dialog box opens. 3. Type a name for the new profile and select desired options: ■ Store the custom output image size in this Profile—You can create a custom image size as part of the settings; if you adjusted the output image size for the selected configuration, that output image size is saved with this profile. See “Saving a Custom Size” on page 54 for more about a custom image size.
TROUBLESHOOTING 59 Maintenance This chapter contains information on troubleshooting, cleaning, uninstalling, and scanner specifications. TROUBLESHOOTING In addition to the troubleshooting information contained in this section, please see the Readme file in the PaperPort directory on your computer’s hard drive. The Readme file contains additional information that may help you diagnose problems with the scanner.
60 VISIONEER ONETOUCH 9120 USB SCANNER INSTALLATION GUIDE • Did you select another TWAIN source for acquiring images? If you use multiple TWAIN devices with your computer, you may have selected another source for images. Start the PaperPort software and click the Scan icon. From the Scanner drop-down list, choose Visioneer Scan Manager Pro. Problem: During installation I got the error message: PaperPort Installation is not complete. What do I do? The installation procedure was not successful.
HOW TO UNINSTALL YOUR SCANNER 61 HOW TO UNINSTALL YOUR SCANNER To uninstall the Visioneer OneTouch 9120 scanner, remove the OneTouch Version 3.0 software first, and then remove the PaperPort software, or other scanner software. STEP 1: UNINSTALLING THE VISIONEER ONETOUCH SOFTWARE 1. On the Windows taskbar, click Start, point to Settings, and then click Control Panel. 2. Double-click the Add/Remove Programs icon. ■ Windows 98SE or ME: The Add/Remove Programs Properties window opens.
62 VISIONEER ONETOUCH 9120 USB SCANNER INSTALLATION GUIDE STEP 2: UNINSTALLING THE PAPERPORT SOFTWARE 1. On the Windows taskbar, click Start, point to Settings, and then click Control Panel. Windows XP: choose Control Panel from the Start menu. 2. Double-click the Add/Remove Programs icon. ■ Windows 98SE or ME: The Add/Remove Programs Properties window opens. Select the Install/Uninstall tab. ■ Windows 2000 or XP: The Add or Remove Programs window opens.
VISIONEER 9120 USB SCANNER SPECIFICATIONS 63 VISIONEER 9120 USB SCANNER SPECIFICATIONS Bit Depth Scanning resolution Maximum Item sizes Scanner dimensions Height Width Length Weight USB Standard Operating temperature Relative humidity Power supply Input voltage/frequency Output voltage/watt Safety and agency certifications 48-Bit color (internal), 16-Bit gray (internal), 1-Bit line art/text Optical resolution: 2400 x 4800 dpi 8.5 x 11.69 inches (21.6 x 29.7 cm) 3.25 inches (8.3 cm) 12.25 inches (31.
64 VISIONEER ONETOUCH 9120 USB SCANNER INSTALLATION GUIDE
INDEX INDEX D Numerics DeScreen 38 destination application 17, 34 documentation 5 dots-per-inch 45 35mm slide 26 35mm slide mask 25 35mm slide negative 27 35mm slide scan 25 A aspect ratio 53 Auto Trim 51 AutoCrop 37 AutoScan 22 resolution 57 B bit depth 56 bitmap icon 23 blurred image 45, 47 brightness 37, 47 sampler 48 C calibration band 27 calibration slot 26 channel menu 50 color bit depth 56 channel 50 histogram 48 hue 49 options 49 scanning 37 computer requirements 4 Configuration dialog box 3
INDEX 66 monitor 4 N negative 26 negative mask 25 negative scan 25 new configuration 36 O OCR 35 OCR button 18 OneTouch buttons configuring 32 preferences 41 select new options 35 P page icons 34 page settings 39 page size 37 paper size 57 PaperPort desktop 21, 23, 29 help topics 24 install 6 scan from 20 scan pane 21, 29 scanning with Widows 98SE, ME, 2000 20 scanning with Windows XP 29 preferences tab 41 preview image 24, 28, 30 R resolution 37, 45, 52, 57 resolution for transparencies 28 response c
INDEX TWAIN applications 20 W Windows XP custom settings 31 scanning in PaperPort 29 WIA scan 29 Z zoom image 55 67
INDEX 68