Specifications

OPERATION

1. TURN ON/OFF This product will come on automatically when power is turned on. Or use

the remote control to turn on. The product will always resume the last input and volume

level.

NOTE: The IR receiver is built into the front of the master loudspeaker. The master

loudspeaker has lights on the front panel, the slave does not.

2. SELECT BLUETOOTH INPUT

a. Turn loudspeakers ON or select Bluetooth on remote control.

The blue light starts to flash to show it is in pairing mode. At this point the

cabled input is still active input.

b. On your device turn Bluetooth on.

c. Connect to “VISION SPEAKERS”. The yellow light will turn off, and the blue light

will be on continuously to indicate the Bluetooth source is now selected.

NOTE 1: If you have connected before it will automatically connect when you turn

Bluetooth on.

3. AUTO-STANDBY

If the amplifier senses no input it will automatically go into standby mode.

As soon as you press play on your source device it will automatically switch on again.

If loudspeakers were put into standby manually they will not wake up automatically.

CS-1600P_manual_en