Installation Guide

Introduction
Thanks for choosing the Vision’s wireless 4-in-1 Motion sensor of the home security
device. The new multi-sensor consists of motion, temperature, humidity & light sensor for
combing several functionality in one device; more attractive and economic consideration.
This sensor is a Z-Wave
TM
enabled device (interoperable, two-way RF mesh networking
technology) and is fully compatible with any Z-Wave
TM
enabled network and it’s security
framework. Every mains powered Z-Wave
TM
enabled device acts as a signal repeater and
multiple devices result in more possible transmission routes which helps eliminate “RF
dead-spots”.
Z-Wave
TM
enabled device displaying the Z-Wave
TM
logo can also be used with it
regardless of the manufacturer, and ours can also be used in other manufacturer’s Z-
Wave
TM
enabled networks. This sensor monitors movement, and send Z-Wave
TM
signal
when movement is detected inside the building. With Temperature, Humidity & Light
sensor built inside, it will send the signal out when temperature, humidity & Lightness
changed. When the device is secure included into Z-Wave network, above
communication will be encrypted.
Product Description and Specification
*** For indoor use only ***
Specification:
Package Content:
Protocol: Z-Wave™ (ZGM130S)
Frequency Range:
865.22MHz (ZP3113IN-7)
868.42MHz (ZP3113EU-7)
869.00MHz (ZP3113RU-7)
908.42MHz (ZP3113US-7)
916.00MHz (ZP3113IL-7)
919.80MHz (ZP3113HK-7)
921.42MHz (ZP3113BR-7)
920.00MHz~923.00MHz (ZP3113TH-7)
920.00MHz~923.00MHz (ZP3113KR-7)
922.00MHz~926.00MHz (ZP3113JP-7)
Operating Range: Up to 100 feet line of sight
Operating Temp.: -10°C~ 40°C (5°F~104°F)
1pc
1pc
1pc
1pc
ZP 3113 Multi-Sensor
Adhesive tape for sensor
CR123A Lithium Battery
Installation & Operation Manual
- 1 -
(E) – Angled
(B) – Table
–
- 2 -
(C) - Ceiling
(D) – Vertical
(A) – Wall Corner