Datasheet

Document Number: 51031 For technical questions, contact: [e-mail]
See also: Application notes
www.vishay.com
Revision: 23-Aug-07 99
P11, PA11
Modular Potentiometers with Cermet (P11) or
Conductive Plastic Elements (PA11)
Vishay Sfernice
RSPP F2 : PUSH/PUSH SWITCH WITH TWO
REVERSING SWITCHES
Idle position : the contact is made between 1 and 2 and a and
b. It is open between 2 and 3 and b and c.
Pushed position: the contact is made between 2 and 3 and b
and c. It is open between 1 and 2 and a and b.
Not available on P11V and P11-2.
On request for P11Q and P11-7.
SWITCH MODULES
ELECTRICAL DIAGRAM
CENTER CURRENT TAP "J"
The extra terminal is a solder lug connected at 50 % of
electrical travel and situated in the potentiometer module
opposite the terminals.
Center tap short circuit 11° of travel.
SHAFTS (see Ordering Information)
The shaft lengths are always measured from the mounting
face.
Standard shafts are designed by a letter code (one or two
digits). Shafts slots are aligned to ± 10° of the wiper position.
CONCENTRIC SHAFTS
The CC or 0 or 77 concentric shaft versions allies the total
flexibility of the P11/PA11 modular system to the advantage
of having two separate shafts.
The outer 6 mm or 1/4" or 1/8" dia. shaft drives the modules
situated immediately behind the panel, before the spacer
module.
The inner 3 mm or 1/8" or 0.07" dia. shaft drives the modules
situated after the spacer module.
Spacer is available with a choice of two spacer thickness :
5.08 mm designations: CC, 0, 77
2.54 mm designations: CC-3, 0-3, and 77-3. See
dimensional drawings on second page of this data sheet
CUSTOM SHAFTS
When special shafts are required - flat, threaded ends,
special shaft lengths, etc. a drawing is required.
SPLINED SHAFT "I"
SWITCH SPECIFICATIONS
MODEL RS - RSI F2 to F8
Switching Power max.
62.5 VA υ
15 VA =
50 VA
υ
Switching Current max.
0.25 A 250 V υ
0.5 A 30 V =
0.5 A
υ
Max. Current Through Element 2 A 2 A
Contact Resistance 30 m Ω 100 m Ω
Dielectric
Strength
Terminal to
Terminal
1000 V
RMS
1500 V
RMS
Terminal to
Bushing
2000 V
RMS
2000 V
RMS
Max. Voltage Operation
250 V υ
30 V =
250 V υ
Insulation Resistance
Between Contacts
10
6
M Ω 10
3
M Ω
Life at P max.
10 000
actuations
100 000
actuations
Minimal Travel 25°
3.3 mm to
4.7 mm
Operating Temperature - 40 °C to + 85 °C - 20 °C + 70 °C
13 213 213
213
bac
RSD
RSF
RSID
CCW POSITION
RSIF
CW POSITION
RSPP F2
IDLE POSITION
PUSHED POSITION