User guide

YMLM1WN 3G Wireless N150 Mini Router m1-User Guide
www.netcomm.com.au 19
NetComm Liberty Series - 3G Wireless N150 Mini Router m1
Basic Settings >Network Setup
This page allows you to change the LAN (Local Area Network) and WAN (Wide Area Network) connection settings on your NetComm m1.
LAN Setup
• LAN IP Address: the local IP address of this device.
• Subnet Netmask: the subnet mask of the local IP address
WAN Setup
WAN elds may not be necessary for your connection.
1 WAN type 3G: The information on this page will only be used when your service provider requires you to enter a User Name and
Password to connect with the 3G network.
2 3G Networks: Please refer to your documentation or service provider for additional information.
3. APN: Enter the APN for your 3G connection here.(optional)
4. PIN Code: Enter the PIN Code for your SIM card (optional) account: Enter the username for your 3G connection here.
(Please contact your 3G service provider to obtain this information.)
5. Password: Enter the Password for your 3G connection here.
(Please contact your 3G service provider to obtain this information)
6. Authentication: Choose your authentication type.
7. Primary DNS: This feature allows you to assign a Primary DNS Server
(Please contact your 3G service provider to obtain this information)
8. Secondary DNS: This feature allows you to assign a Secondary DNS Server.
(Please contact your 3G service provider to obtain this information)
9. Connection Control: There are 3 modes to select:
• Connect-on-demand: The device will connect with 3G service when the connected clients send outgoing packets.
• Auto Reconnect (Always-on): The device will automatically reconnect with 3G service when the connection drops.
• Manually: The device will not make connect to the 3G service unless someone clicks the Connect-button in the Status-page.
10. Keep Alive: This will prevent your 3G connection from timing out.