User's Manual

Customer Service - 1.800.343.9463 Page 4
The cabinets have leveling legs that can be adjusted up or
down with a wrench (provided with unit) as needed. There
are two primary reasons for leveling the cabinet:
— To assure that the unit stands solidly on the oor
without rocking back and forth
— To adjust the doors and make sure they are ush with
one another, providing a tight seal
These leveling legs are pre-adjusted at our factory, but
they may need to be tweaked to t your specic install
location. To level the unit, slowly adjust the legs using the
wrench. Work in a clockwise motion to lengthen the leg
or a counter-clockwise motion to shorten it.
Do not try to level the cabinet with a leveling device.
The unit is designed to stand slightly o plumb, tilting
backward acutely so the doors will close rmly. This will
compensate for the weight of the doors.
Once you have completed leveling the cabinet, check the
unit to determine whether or not the doors are ush and
sealing properly.
LEVELING THE CABINET