Use and Care Manual

1
0
10
W W W . V I N O T E M P . C O M
OPERATING YOUR WINE COOLER
Gently place/slide the racks into the wine cellar.
Determine the best temperature setting to use.
Place bottles inside the cooler.
Plug the power cord into a standard ground electrical outlet.
In order to conserve energy and maintain proper storage temperature, limit the frequency in
which you open the door.
You can turn the interior light on and off by touching the button labeled with a light on the front
of the control panel.
If unit is equipped with a lock, insert the key provided and turn to operate the lock. Make sure
that the key is kept in a secure place when not in use.
IMPORTANT: When using the wine cellar for the first time, allow at least 24 hours for the internal
temperature to adjust properly. Make sure there are at least 3 to 5 bottles in the unit.
TEMPERATURE CONTROL:
IMPORTANT: In order to operate efficiently, this product should be in an environment with an
ambient temperature of less than 90°F (32°C).
TEMPERATURE PRESET:
For your convenience, the manufacturer has pre-set the temperature of the wine cooler to 54°F
(12°C).
LIGHT
To turn on the internal LED lighting, touch the button.
SETTING THE TEMPERATURE:
The temperature range for this unit is from 45-65°F/7-18°C.
UP
Used to raise (warm) the set temperature by 1°C or 1ºF.
DOWN
Used to lower (cool) the set temperature by 1°C or 1ºF.
Error Codes: When the cabinet temperature is too low, the LED will display “LL”. When the
temperature is too high, it will display “HH”. The “ER” display shows when there has been a power
disruption.