Owners Manual - Tan

OPERATING YOUR WINE COOLER

The controls of your wine cooler

POWER OFF/ON

To turn the appliance ON or OFF, touch the

SET

To set or view the internal temperature setting for each zone.

LIGHT

To control the interior light, turn on/off.

Press to raise (warm) the set temperature by

°C or 1°F.

DOWN

Press to lower (cool) the set temperature by

°C or 1°F.

°F/°C Selector

. To change the temperature from

Fahrenheit to Celsius or from Celsius to Fahrenheit, touch and hold mark for 5 seconds.

TEMPERATURE ZONES

The wine cooler has two temperature zones with a temperature range of 40-72°F. The recommended temperature

setting for each zone is:

• Lower Zone between 55-72°F (Ideal for red and white wines)

• Upper Zone between 40-55°F (Ideal for sparkling and white wines)

NOTE: The temperature set for the Lower Zone must always be the same or higher than the temperature set for the

Upper Zone. For optimal performance, the set temperature of the two zones should differ by at least 4°F. It is also normal

for the temperature of the air inside the unit fluctuate by plus/minus 7°F. If it fluctuates any more than 7°F, please contact

customer service.

SETTING A TEMPERATURE

• Touch SET

display window marked for UPPER ZONE and for LOWER ZONE.

•

When you touch SET for the first time, the LED readouts will show the original temperature settings

(preset factory setting for UPPER ZONE is

50°F / 10°C and for LOWER ZONE is 60°F / 16°C).