Specifications

Vincent

ADVANCED PLAYBACK FUNCTIONS

Operation Button(s) Description

Program the

playback order

PGM (27)

Number

Keys

(17)

With this function it is possible to set up a desired playing sequence of the

CD tracks. This also allows you to play a smaller selection of your own

choice from all the CD tracks. This programming can only be done with

the remote control. The “program” is set up by the following procedure:

• Press the button “PGM”

• Enter the numbers of all the desired tracks one after the other on

the number pad of the remote control. For track 10 use the “10”

button. For all other two-figure track numbers first press the “10+”

button as many times as necessary until the number of 10’s is cor-

rect, then press the button for the last figure (for track 23 press the

“10+” button twice and the “3” button once).

• To confirm the program press “PGM” or “PLAY/PAUSE” (5)(21).

The “REPEAT” play function (7)(20) can also be applied to the program-

med track selection. You can see on the display (3) from the text “PGM”

that a program is active. It is only if you press “CANCEL” (26), eject the

CD or switch off the CD player that your own playing sequence is deleted.

Delete the selected

playing sequence

CANCEL (26)

This button deletes a program set up with the “PGM” function (27). If the

button is pressed during a pause, any created program will be deleted

and you can continue to play the current track and the remaining CD

tracks with “PLAY/PAUSE” (5)(21). Just as with the programming, this

action may only be performed with the remote control.

OPERATING THE APPLIANCE