Installation Instructions

3130
Installation Procedure (French Door Models)
Installation Procedure (French Door Models)
Replace door.
Open door completely. Put hinge trim plates back on.
Note: Screw holes may need to be re-aligned.
Take out pins.
Note: To adjust door turn adjustment screw
clockwise (up) or counterclockwise (down).
Close door.
11
Attach screws to the side of the framing.
Note: 2 screws for single ovens,
4 screws for double ovens (screws not included).
12
Replace racks.
13
14
15
16
Lift oven into position.
DO NOT use the handle or oven door to lift the oven.
Push oven straight in.
7
Unscrew pallet screws from side of oven.
8b
Neutral
Green
White
Black
Red
Wiring option 2*
(connect the white to the incoming neutral,
attach green to grounded junction box)
Wiring option 1*
(connect the white and green to the incoming neutral)
8c
Neutral
Green
White
Black
Red
Wiring option 3*
(connect the white to the incoming neutral,
attach green to suitable ground)
9
10
Neutral
Green
White
Black
Red
8a
*Note: Check local code to see which wiring option should be used when grounding the unit.