Use and Care Manual

ManualsBrandsViking ManualsCooking Appliances30 Inch Double Electric Wall Oven with 4.7 cu. ft. Upper/Lower Capacity, Vari-Speed Dual Flow Convection, Rapid Ready Preheat, Multiple Design Options and Star-K Certified: White

Product Controls

2. Set the desired baking time:

Once the start time is set, the display will switch to :00 and

the words

SET

COOK

and

TIME

will appear on the right side of the display. You will now enter the desired baking

time. Add 30 minutes to the desired bake time to allow for preheat.

Turn the “SET” knob until the desired baking time is displayed in hours and minutes. Once the desired bake time is set,

the word

SET

will disappear and the word

DELAY

will appear in the display indicating that the Bake Hours program has

been set.

NOTE: For Double Ovens, the word

DELAY

will show with either

UPPER OVEN

LOWER OVEN

depending on which

oven has been selected.

3. Set the Oven Function selector to the desired function – BAKE, CONVECTION BAKE, OR TRUCONVEC™, etc.

4. Set the temperature control knob to the desired baking temperature.

5. The automatic time bake program is now set!

NOTE: The display will continue to show the amount of bake time that was programmed (this will remain until the

programmed start time is reached). You can return the display to clock mode by pressing the “CLOCK” button on the

Select models or “PROBE” on the French door models. Notice that a small clock will be displayed in the upper right

corner to indicate that a program is in progress. Switch back to the timer mode by pressing the “BAKE HOURS” button.

6. When the specified time is reached, the oven will automatically turn on. It will bake for the programmed amount of

time at the selected temperature.

NOTE: At one minute from the end of the specified bake program, the oven timer will beep once. At the end of the

specified bake program, the oven will automatically turn off and the timer will sound a series of three beeps. This will

continue until the “START TIME” button is pressed. The display will then return to displaying the time.

NOTE: Setting the remaining duration time to :00 will cancel the Automatic Bake program.

Clocks and Timers

(Digital Display - Select / French Door Models)

Sabbath Mode (Digital Display models only)

To set the Sabbath Mode

1. Press the Min/Sec Timer button until it beeps.

2. Turn SET knob until SAB appears in the display.

3. Press the Min/Sec Timer button to toggle between NO or ON. NO is the default setting.

4. After selecting ON, turn SET knob to done.

5. Press Min/Sec Timer button to clear display.

To remove Sabbath Mode

Follow the same steps above and select the NO setting.