FAUCET SPECIFICATIONS Single Hole Bathroom Faucet Model VG01041 MODEL VG01041 FEATURES PACKING LIST Faucet Assembly Brass ring Rubber washer Two Metal braided hoses Nut DIMENSIONS FAUCET HEIGHT 6 3/4" VG01041 SPOUT REACH 4 3/4" HOLE DIAMETER 1 3/8" 6 3/4" MODEL # 4" 4 3/4" 2" NOTE: All faucets are compliant to CEC 2016 regulations. If you have inquiries about your water flow, please email techmail@vigoindustries.com.
6 3/4" 4" 4 3/4" 2" 1 1/2" MAX.
FLOW RATE REGULATIONS This product meets the CEC requirements. It is up to the discretion of the client to modify the product with the provided restrictor. Doing so will remove the ability for the product to meet certain low flow standards. Please talk to your local or statewide plumbing enforcement agency prior to modifying.
PACKAGE CONTENTS METAL WASHER RUBBER WASHER ASSEMBLY NUT FAUCET TWO FLEXIBLE HOSE 1. SHUT OFF WATER SUPPLY. REMOVE OLD FAUCET AND FLEXIBLE HOSES. CLEAN SINK SURFACE IN PREPARATION FOR THE NEW FAUCET. FLUSH WATER CONNECTION AT HOME TO MAKE SURE NO DEBRIS IS STUCK IN THE LINE. 1 MAINTENANCE Your new faucet is designed for years of trouble-free performance. Keep it looking new by cleaning it periodically with a soft cloth.
TROUBLESHOOTING PROBLEM POTENTIAL CAUSE 1 - Leaks from handle 2 - Insufficient flow rate 1.B - Contact Vigo Technical Support for replacement. 2.A - Dirty aerator 2.B - Clog in supply hose / line 2.C - Clog in copper supply pins 3 - Leak at connection points 4 - Loose faucet body 5 - Loose handle CORRECTIVE ACTION 1.A - Remove cartridge from housing, wash thoroughly with hot water and reseat in housing. 1.A - Cartridge unseated 1.B - Cartridge defective 2.
VIGO INDUSTRIES, LLC ("VIGO") FAUCET LIMITED LIFETIME WARRANTY EFFECTIVE APRIL 1, 2013 VIGO offers the following limited warranty on each of its Faucet products (the "Product") and the components thereof. This warranty extends only to the original owner for personal household use. For commercial uses, additional limitations apply.
Robinet de salle de bain pour vasque Raccords de plomberie standard LISTE DES ARTICLES Ensemble de robinet Anneau en laiton Rondelle en caoutchouc DIMENSIONS DU JET 4 3/4" DE L'ORIFICE 1 3/8" 6 3/4" VG01041 HAUTEUR DU ROBINET 6 3/4" 4" 4 3/4" 2" de la CEC de 2016.
6 3/4" 4" 4 3/4" 2" 1 1/2" MAX.
responsable des modifications et de la touche qui peut venir avec la modification du poste de vente de produits et Restricteur Vous trouverez les 1,2 restricteurs gpm ici. Il suffit de retirer les 1,2 restricteurs gpm et installer le robinet comme d'habitude. Robinet 1.2gpm restricteur 1.
CONTENU DE L'EMBALLAGE ASSEMBLAGE 1 RONDELLE EN CAOUTCHOUC ROBINET DEUX FLEXIBLES RETIREZ L'ANCIEN ROBINET ET LES ANCIENS FLEXIBLES. NETTOYEZ LA SURFACE DU LAVABO EN VUE DE L'INSTALLATION DU NOUVEAU ROBINET. RINCEZ AVEC DE L'EAU POUR VOUS ENTRETIEN CONDUIT. nettoyants abrasifs, la laine d'acier et les produits chimiques puissants peuvent 2 2. BRANCHEZ LES FLEXIBLES SUR LES TUYAUX EN LAITON. Pince multiple Mastic de plombier Ruban pour tuyau 3. POSITIONNEZ LE NOUVEAU ROBINET SUR LE LAVABO.
MESURE CORRECTIVE l'eau chaude et replacez la cartouche dans son logement. 1.B - Contactez le service de soutien technique de Vigo pour remplacer la cartouche. 3 - Fuites au niveau des points de raccordement 3.A - Fuite du flexible au niveau du point de raccordement 2.C - Retirez les axes en cuivre et rincez/nettoyez-les. pas de fuites. perpendiculaire au comptoir. cartouche. FINI Cartouche 68046 68031W 68062 64029 64018W 74020 68087 CH, BN, ARB, MB CH, BN, ARB, MB - W W W W W W W www.
VIGO INDUSTRIES, LLC ("VIGO") usage personnel domestique. D'autres limitations s'appliquent en cas d'usage commercial. constructeur. constructeur. un tiers. Limitations directement ou indirectement. produit, notamment, mais sans s'y limiter, de les briser et de provoquer des blessures, voire la mort.] SAUF DISPOSITION CONTRAIRE CI-DESSUS, VIGO NE FAIT AUCUNE GARANTIE, EXPRESSE OU IMPLICITE, Y COMPRIS DE VALEUR MARCHANDE, constructeur.
ESPECIFICACIONES DEL GRIFO Modelo VG01041 MODELO VG01041 CONTENIDOS DEL PAQUETE Juego de grifo Anillo de bronce Arandela de caucho Dos mangueras de metal con refuerzo trenzado Tuerca DIMENSIONES GRIFO ALTURA 6 3/4" BOCA ORIFICIO 4 3/4" 1 3/8" 6 3/4" MODELO NRO. VG01041 4" 4 3/4" 2" NOTA: Todos los grifos cumplen con CEC 2016 regulaciones. Si usted tiene preguntas acerca de su flujo de agua, por favor escriba techmail@vigoindustries.com.
6 3/4" 4" 4 3/4" 2" 1 1/2" MAX.
NORMAS DE CAUDAL La velocidad de flujo con restrictores - 1.2 gpm La velocidad de flujo sin restrictores - 1.5 gpm Restrictor quitar los restrictores de 1,2 gpm e instalar el grifo como de costumbre. Grifo Limitador 1.2gpm Limitador 1.
CONTENIDO DEL PAQUETE MONTAJE ARANDELA DE METAL ARANDELA DE CAUCHO TUERCA GRIFO DOS MANGUERAS FLEXIBLES 1 1. CIERRE EL SUMINISTRO DEL AGUA. QUITE EL GRIFO VIEJO Y LAS MANGUERAS FLEXIBLES. LIMPIE LA SUPERFICIE DEL LAVABO PARA PREPARARLO PARA EL NUEVO GRIFO. ENJUAGUE ASEGURARSE DE QUE NO QUEDEN TRABADOS MANTENIMIENTO inconvenientes. 2 2. CONECTE LAS MANGUERAS FLEXIBLES A HERRAMIENTAS NECESARIAS Llave inglesa Pinzas pico de loro Destornillador para tornillos de cabeza plana 3.
PROBLEMA CAUSA POTENCIAL MEDIDA CORRECTIVA 1.A - Cartucho no ajustado 1.B - Cartucho defectuoso 2 - Caudal insuficiente 2.A - Aireadores sucios 4 - Afloje el cuerpo del grifo no abrasivo (es decir, mitad agua caliente, mitad vinagre). 5 - Afloje la llave 3.B - Arandela defectuosa completo. 4. - Los dispositivos de ensamblaje se aflojaron 3.A - Ajuste las mangueras. Si eso no resuelve el problema, 4.
VIGO INDUSTRIES, LLC ("VIGO") comienza en la fecha de compra inicial por parte del propietario, contratista o constructor a VIGO o a un distribuidor autorizado de VIGO y durante toda la vida del propietario o usuario final originales. VIGO. Limitaciones aplicables sobre dichas instalaciones. otros, productos de vidrio (es decir, puertas de duchas y lavabos de vidrio) por parte de personas sin experiencia puede provocar fallos en el producto incluidos, entre otros, el Producto.