24/27/32/42-INCH WUXGA PREMIUM TFT-LED MONITOR USER MANUAL Please read this manual thoroughly before use, and keep it handy for future reference.
SAFETY INSTRUCTION CAUTIONS ………………………………………………………….…… 2~3 …………………………………………………………….......................... 4 FCC RF INTERFERENCE STATEMENT ……………………………....................... CONNECTING WITH EXTERNAL EQUIPMENT REMOTE FUNCTIONS 5 …………………………………… 6 ………………………………………………………………… 7 CONTROLS AND FUNCTIONS ……………………………………………………….. 8 ~ 15 MOUNTING GUIDE ……………………………………………………………………..
Important Safety Instruction 1. Read these instructions. 2. Keep these Instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8. Do not install near any heat sources such as radiators, heat registers,stoves, or other apparatus (including amplifiers) that produce heat. 9.
- The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed no the apparatus. - Minimum distances(e.g. 10cm) around the apparatus for sufficient ventilation. “WARNING – To reduce the risk of fire or electric shock, do not expose the apparatus to rain or moisture.” “The apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus.
CAUTION The power supply cord is used as the main disconnect device, ensure that the socket-outlet is located/installed near the equipment and is easily accessible. ATTENTIONN Le cordon d`alimentation est utillsé comme interrupteur général. La prise de courant doit être située ou installée à proximité du matériel et être facile d`accès ▶ NEVER REMOVE THE BACK COVER Removal of the back cover should be carried out only by qualified personnel.
NOTE This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
1. BACK PANEL CONTROL 1.1. 24 inch 1 2 3 4 5 6 7 8 9 1. DC12V OUT(CAMERA USE) 2. TRIGGER INPUT 3. COMPONENT AUDIO L/R IN & COMPONENT Y/Pb/Pr IN 4. AUDIO OUT (Speaker) 5. PC AUDIO IN 6. PC RGB IN 7. DVI IN 8. HDMI1 IN 9. HDMI2 IN 10 11 12 13 14 15 16 17 18 10. AV2 AUDIO R/L IN 11. AV1, S-VIDEO AUDIO R/L IN 12. S-VIDEO OUT 13. S-VIDEO IN 14. AV2 OUT 15. AV2 IN 16. AV1 OUT 17. AV1 IN 18. AC IN (POWER) 1.2. 27/32/42 inch 1 2 3 4 5 1. TRIGGER INPUT 2.
REMOTE CONTROLLER(Optional) 1. POWER( ) Turns the power ON or OFF. There will be a few seconds delay before the display appears. 2. SOURCE Selects an input source. 3. AUTO Auto geometry adjustment in the RGB PC source. 4. HOLD Stops the Trigger & Auto switching functions. 5. MUTE Mutes the sound. 6. MENU Activates and exits the On Screen Display. 7. EXIT Exits the On Screen Display. 8. VOL(◀ & ▶) Increases or decreases the level of audio volume. 9.
FRONT KEY CONTROL 1 2 3 4 5 6 7 8 9 1. SOURCE/SELECT Select PC or video. Select On Screen Display menu. 2. MENU/EXIT Activate and exit the On Screen Display. 3 / 4. ▼ / ▲ These buttons allow user to enter the sub-menu of the activated function. The up(▲) button is HOLD function and stop the Trigger & Auto switching functions. 5 / 6. ◀ / ▶ Adjust the volume and menu settings. 7. POWER ON/OFF( / I ) Turns the power ON or OFF. There will be a few seconds delay before the display appears. 8.
OSD MENU DESCRIPTION All picture, sound settings and setup for the monitor can be adjusted in the OSD menu. (On Screen Display) To adjust the OSD screen: 1. Press the Menu button to enter the OSD menu. 2. Press the ▲/▼ buttons to select the desired option. The selected option is highlighted. 3. Press the ▶ button to enter the submenu for adjusting items. 4. Change the value you wish to adjust by using the ◀/▶ buttons. 5. Press the ◀ button to exit the submenu for adjusting items. 6.
B. Picture/Sound Option Function Value Picture Mode Sets picture mode. See table below Color Tone Sets color tone. See table below Mute Mutes speaker sound. Off or On Volume Adjust the level of audio volume. 0 ~ 100 Size Display picture size. See table below Reduces noise of the picture. On or Off Activates the 3D comb filter. On or Off NR 1) 3D Comb PC 2) 3) See table below. 1) Unavailable in RGB PC, DVI, HDMI1 and HDMI2.
Color Tone Cool Gives the white color a bluish tint. Normal Gives the white color a neutral tint. Warm Gives the white color a reddish tint. User To manually adjust the color tones(Red, Green, and Blue).
C. PIP Option Function Value PIP Activates the PIP feature. Off or On Input Source Selects the input source for the PIP area. See table below PIP Mode PIP Size Position Enables 3 screen size.4:3 side by corner, 4:3 side by 4: 3, PIP, PBP1 or PBP2 and full screen side by side. Selects the size of PIP screen. Size1, Size2 or Size3 Selects the position of PIP screen. Right of Bottom, Left of RB, LB, LT or RT Bottom, Left of Top and Right of Top.
D. Setup Option Function Value Resets the monitor settings to their Reset factory default. English, French, Deutsch, Language Sets the language of the OSD menu. Italian, Spanish, Portuguese or Nederland Changes background of monitor menus. OSD Tone (e.g. input source & information) Displays a blue screen if the monitor Blue Screen receives no signal. Locks all buttons of the monitor. Key Lock1) Note: Use remote controller to unlock.
※ NOTICE: When watching moving images on a computer or a DVR through this monitor using a PCRGB, DVI or HDMI input, you can see blurred images on the edge of icons and pop-up windows but, this is not a defect. The blur may appear on the fixed images such as another icon and pop-up window because the 120Hz feature is focused on fast moving images to enhance the quality of moving image. Motion Detection (Built-in PIR sensor; Passive Infra-Red) Option Trigger Enable Function Activates the trigger feature.
N/C(Normally Closed): The Trigger function is activated when the trigger cable is opened. N/O(Normally Opened): The Trigger function is activated when the trigger cable is closed. High: The Trigger function is activated when the trigger signal is DC 2~5[V]. Low: The Trigger function is activated when the trigger signal is DC 0~0.6[V]. Note: In this case, trigger port has high status electrically, so the trigger cable has to have ground( or earth) status to be activated.
Wall mounting (Optional) The LCD monitors are suitable for VESA standard wall mount (not included in the delivery). Screws Screws < 27/32 inch > < 42 inch > 1. 27/32-inch: VESA 200mm x 200mm 2. 42-inch: VESA 600mm x 100mm x 100mm. ※ Attention! - 27/32inch : You must use four M6x8 screws to assemble this monitor and the wall mount bracket. - 42-inch : You must use six M8x8 screws to assemble this monitor and the wall mount bracket.
▶ PIN ASSIGNMENTS Pin 1 RED VIDEO 9 2 GREEN VIDEO 10 SIGNAL CABLE DETECT 3 BLUE VIDEO 11 GROUND 4 GROUND 12 SDA(for DDC) 5 GROUND 13 H-SYNC.(or H+V SYNC.) 6 RED GROUND 14 V-SYNC. 7 GREEN GROUND 15 SCL(for DDC) 8 BLUE GROUND D-SUB ▶ ACCESSORIES 1. Power cord 2. User’s manual 3. Cable (PC or HDMI) 4. Trigger cable (Option) 5. Stereo cable (Option) 6. Remote controller (Option) 7. Batteries (Option) 8. Wall mount (Option) INSTRUCTION MANUAL ……………………………………………………………………….
POWER CONSUMPTION MODE ON POWER CONSUMPTION 24” 27” 32” 42” <43W <48W < 55W < 67W < 1W POWER OFF LED INDICATOR The power management feature of the monitor is comprised of four stages: On(Green) and Unsupported mode(Green). MODE LED COLOR MONITOR OPERATION ON GREEN Normal Operation UNSUPPORTES MODE POWER OFF GREEN RED Normal operation but the on screen Display will show error massage Not Operation 18 ……………………………………………………………………….
LCD-Type 24" 27" Type 24˝ Diagonal AM-TFT (Active-Matrix) 27˝ Diagonal AM-TFT (Active-Matrix) Pixel pitch(mm) 0.27675(H) x 0.27675(V) 0.3112(H) x 0.3112(V) BRIGHTNESS 250cd/m² (Typical) 300cd/m² (Typical) CONTRAST RATIO 5000:1(Typical) 3000:1(Typical) VIEWING ANGLE 178°/178°(H/V) RESPONSE TIME 12msec (Gray to Gray) RESOLUTION (H x V) 1920X1080 @60Hz FREQUENCY HORIZONTAL: 31~80KHz, VERTICAL: 56~75Hz VIDEO(2ch input 1.
LCD-Type 32" 42" Type 32˝ Diagonal AM-TFT (Active-Matrix) 42˝ Diagonal AM-TFT (Active-Matrix) Pixel pitch(mm) 0.36375(H) x 0.36375(V) 0.4845(H) x 0.4845(V) BRIGHTNESS 350cd/m² (Typical) CONTRAST RATIO 3000:1(Typical) VIEWING ANGLE 178°/178°(H/V) RESPONSE TIME 6.5msec (Gray to Gray) RESOLUTION (H x V) 1920X1080 @60Hz FREQUENCY HORIZONTAL: 31~80KHz, VERTICAL: 56~75Hz VIDEO(2ch input 1.
WEEE Symbols Correct Disposal of This Product (Waste Electrical & Electronic Equipment) (Applicable in the European Union and other European countries with separate collection systems) This marking shown on the product or its literature, indicates that it should not be disposed with other household wastes at the end of its working life.
MEMO
MEMO
MEMO
P/N : L39ME0359 Rev.
