User Manual

3. Standard mode: Is designed for presentations under daylight environment to match

PC and notebook coloring.

4. ViewMatch mode: Switches between high brightness performance and accurate color

performance.

5. Movie mode: Is appropriate for playing colorful movies, video clips from digital

cameras or DVs through the PC input for best viewing in a blackened (little light)

environment.

Using Screen Color

In the situation where you are projecting onto a colored surface such as a painted wall which

may not be white, the Screen Color feature can help correct the projected picture’s colors to

prevent possible color difference between the source and projected pictures.

To use this function, go to the DISPLAY > Screen Color menu and press / to select a

color which is closest to the color of the projection surface. There are several precalibrated

colors to choose from: Whiteboard, Greenboard, and Blackboard.

This function is only available when a PC input signal is selected.

Fine-tuning the image quality in user modes

According to the detected signal type, there are some user-definable functions available.

You can make adjustments to these functions based on your needs.

Adjusting Brightness

Go to the PICTURE > Brightness menu and press /.

The higher the value, the brighter the image. And the

lower the setting, the darker the image. Adjust this

control so the black areas of the image appear just as

black and that detail in the dark areas is visible.

Adjusting Contrast

Go to the PICTURE > Contrast menu and press / .

The higher the value, the greater the contrast. Use this

to set the peak white level after you have previously

adjusted the Brightness setting to suit your selected

input and viewing environment.

Adjusting Color

Go to the PICTURE > Advanced > Color menu and press / .

Lower setting produces less saturated colors. If the setting is too high, colors on the image

will be overpowering, which makes the image unrealistic.

Adjusting Tint

Go to the PICTURE > Advanced > Tint menu and press / .

The higher the value, the more reddish the picture becomes. The lower the value, the more

greenish the picture becomes.

Adjusting Sharpness

Go to the PICTURE > Advanced > Sharpness menu and press / .

The higher the value, the sharper the picture becomes. The lower the value, the softer the

picture becomes.

-30

+80

-30

+40