User Guide

PJ-WMK-006
Warning Statements
Weight Limit
Maximum Weight:
60 lbs.
THE CEILING STRUCTURE MUST BE CAPABLE OF SUPPORTING 60 LBS. IF NOT, THE CEILING MUST BE REINFORCED. PROPER INSTALLATION
PROCEDURE BY A QUALIFIED SERVICE TECHNICIAN, AS OUTLINED IN THE INSTALLATION INSTRUCTIONS, MUST BE ADHERED TO. FAILURE TO
DO SO COULD RESULT IN SERIOUS PERSONAL INJURY, OR EVEN DEATH.
SAFETY MEASURES MUST BE PRACTICED AT ALL TIMES DURING THE INSTALLATION OF THIS PRODUCT. USE PROPER SAFETY GEAR AND
TOOLS FOR THE INSTALLATION PROCEDURE TO PREVENT PERSONAL INJURY.
PRIOR TO THE INSTALLATION OF THIS PRODUCT, THE INSTALLATION INSTRUCTIONS SHOULD BE READ AND COMPLETELY UNDERSTOOD.
THE INSTALLATION INSTRUCTIONS MUST BE READ TO PREVENT PERSONAL INJURY AND PROPERTY DAMAGE. KEEP THESE INSTALLATION
INSTRUCTIONS IN AN EASILY ACCESSIBLE LOCATION FOR FUTURE REFERENCE.
Indicates that the power plug is to be disconnected from the power outlet
Safety Precautions must be taken at all times
Warning and Caution statements.
A secure structure must support the weight, or load, of the projector. When mounting to a ceiling that contains wooden studs, dead center of the wooden stud
must be conrmed prior to installation.
Do not install on a structure that is prone to vibration, movement or chance of impact. Failure to do so could result in damage to the projector and/or damage
to the mounting surface.
Do not install near heater, replace, direct sunlight, air conditioning or any other source of direct heat energy. Failure to do so may result in damage to the
projector and could increase the risk of re.
At least two qualied people should perform the installation procedure. Injury and/or damage can result from dropping or mishandling the projector.
Recommended mounting surfaces: wooden studs and solid-at concrete. If the mount is to be installed on any surface other than wooden studs, use suitable
hardware (which is commercially available).
Contact Premier Mounts with any questions
Table of Contents
Page 2
Installation Manual
Warning Statements .............................................................................................................................2
Part List ................................................................................................................................................3
Installation Tools ....................................................................................................................................3
Features ................................................................................................................................................4
Projector Preparation ............................................................................................................................4
Bracket Installation ................................................................................................................................6
Leveling The Mounting Bracket .............................................................................................................7
Securing The Upper Assembly Ceiling Plate ........................................................................................8
Securing the Projector To the Upper Assembly ....................................................................................9
Final Adjustment ..................................................................................................................................10
Plastic Cap Installation .........................................................................................................................11
Technical Specications ......................................................................................................................12
Warranty ..............................................................................................................................................13