User Guide

30
Optimizingtheimage
Selecting a picture mode
The projector is preset with several predened picture modes. You may choose one of
these modes that best ts your operating environment and input signal picture type.
To select an operation mode that suits your need, please follow the steps described
below.
• Press [Color Mode] repeatedly until you arrive at the mode you desire.
• Enter IMAGE > Color mode menu and press / to select the required mode.
Picturemodesfordi󰀨erenttypesofsignals
The following lists the Picture modes that can be used for di󰀨erent signal types.
1. Brightest: Maximizes the brightness of the projected image. This mode is suitable
when using projectors in environments such as well-lit rooms where extra-high
brightness is required.
2. Dynamic mode: Used during daytime demonstration to match PC and notebook
computer color tones. The projector will also refer to the projected contents and use
dynamic PC functions to optimize image quality.
3. Standard mode: Used during daytime demonstration to match PC and notebook
computer color tones.
4. ViewMatchsRGBmode: Switches between high brightness levels or precise color
functions.
5. Movie Mode: Applicable for playing colored movies, video clips from digital cameras,
or DVs from a PC input in darker (dim) environments to achieve the best viewing
e󰀨ects.
The available light source modes will be based upon the selected color mode.
Using Screen Color
When the projection surface is colored (such as walls that are painted in colors other than
white), the Screen Color function can be used to calibrate the color of the projected image
in order to prevent color o󰀨sets between the source and color of the projected image.
To use this function, go to Display > Screen Color menu, and press / to select
the color that is closest to that of the projection surface. Several preset color options
are available, namely: white board, green board and blackboard. These setup
functions may di󰀨er according to model type.
This function is only available when PC or HDMI input signals were selected.