User’s Guide 10.
Safety Information 1. Read all of these instructions carefully before you operate. Keep this User Manual safely for later use. 2. Follow all warnings and instructions marked on product. 3. Do not use attachments not recommended by the manufacturer as they may cause hazards. 4. This monitor should be USB powered and operated only from the type of power source indicated on the rating label of monitor. 5. Do not use this monitor near water.
简中 Contents 1. INTRODUCTION....................................................................................... 1 1.1 PACKING LIST ........................................................................................... 1 1.2 PRODUCT OVERVIEW ................................................................................ 1 2. INSTALLING AND SETUP ....................................................................... 3 2.1 DRIVERS INSTALLING ..........................................................
1. Introduction 1.1 Packing List After unpacking, make sure that all of the following contents are included: z z z z z Digitizer Monitor Pen Kits Package USB Cable User’s Guide Driver and Software CD If there is a defect or missing part, please contact the agency where you purchased the product. 1.2 Product Overview 1.2.
① Display and pen touch area ② USB port, to USB powered and display signal input ③ Control key buttons: Power knob, Brightness adjustment (brightness up and down) ④ Power indication ⑤ DC output, to pen powered (depend pen type) 1.2.2Rear View ⑧ ⑥ ⑨ ⑦ ⑥ Stand（x2） ⑦ Foot rubber x5 ⑧ Lock hole ⑨ Rear label Caution: Risk of electric shock; please do not open the shell yourself. Please contact maintenance personnel if any problem countered. 1.2.
2. Installing and setup 2.1 Drivers Installing 2.1.1 Install driver and software for DisplayLink Graphics 1）Open Drivers and Bundled Software CD, and click DisplayLink Graphics - Select Language - Click I Accept to start installing. 2）Then the installation will be completed automatically. 2.1.2 TouchPanel driver installing Please install the TouchPanel Driver before you use the interactive pen. Do the following to install the driver: a.
b. Then do the all steps according setting guide. c. After complete the installation, you need restart your PC. 2.2 Bundled Software Installing There are following software in CD, if need further information of software application, upgrade, please visit our web site. 1) MyScript Stylus: compatible with Windows XP, Vista (You can find the S/N number for MyScript Stylus on the CD package). Attention: All software was protected by copyright.
2.4 Screen Calibrating 1) After driver stalled, in first time for the operation, and after display mode changed, you will be prompted for information and to do a screen calibration program as below. Please move Mouse Cursor to the Monitor which need to calibration and click left button (Press ESC or Mouse Right Button to abort). Attention：Improper calibrate will affect the accuracy of the pen & cursor on the screen. 2) The screen calibrating program in operation in the future: a.
2.5.2 About pen pressure sensitive The pen support 1024 levels pressure. To draw with pressure, select a pressure-sensitive tool from your application’s tool palette, when you press your pen tip lightly, it will show softer color or thin lines, and press harder for dense color or thick lines. Notes: 1) Hold this pen the way you would hold a normal pen or pencil while writing on paper and the allowed pen input angle is 45° in any direction from a position.
2.6.2 DisplayLink on Windows 7 Click DisplayLink icon ( ), open DisplayLink Manager menu, and then click Advanced item to open a Screen Resolution setup window: 1) When a DisplayLink device installed, you can find one more option item which is Multiple displays. 2) Multiple displays provide 4 options for the digitizer display: a. Duplicate these displays: a mirror display mode, it will change to a same resolution of both of main and duplicate monitors. b.
2.7 More Settings of Tablet Windows 7 (or Vista) system is tied with perfect tablet function, in this section all the setting is base on this system. 2.7.1 Pen and Touch Click Start icon → Control Panel → Pen and Touch → click Flicks and Handwriting. a. Pen Options: Use the pen to interact with items on the screen, you can adjust the settings for each pen action and pen buttons. b. Flicks: Use flicks to perform actions quickly and easily with your tablet pen. c.
2.7.2 Tablet PC Setting Click Start icon → Control Panel →Tablet PC Settings → click Other tab → click Go to Input Panel Settings. These Settings allow you to customize below functions of Tablet PC Input Panel. z Opening: Input panel icons and tab settings. z Handwriting: Ink thickness and writing line distance settings. z Ink to text conversion: Handwriting recognition settings. z Text completion: AutoComplete and Predictive settings. z Insertion: Insert button and automatically insert characters.
3. Troubleshooting 3.1 Monitor problems Problems Suggested action No picture *Check the Mode Switch was turn on to Tablet Monitor mode. *Check USB cable should be completely connected to the computer and monitor. *Check computer whether are in dormancy mode. Press keyboard or move the mouse to reactivate the system. *Try adjusting the brightness. *Check that the computer is switched on. *If you use laptop PC, check that the external (RGB) output is selected. *Try to change USB ports.
3.2 Interactive Pen Problems Problems Suggested action The pen is no function * Check APO whether actives, click pen tip could recall active status. * Check the battery whether worn out? If yes, please replace the pen battery. * Try using mouse to double check, if mouse also no function, please restarting your computer or your application. * Try to reinstall the USB Tablet driver. Pen nib is too short * Check whether the pen nib is too short. If yes, replace the pen nib.
4. Product Specification 4.1 Monitor Display Type Resolution Brightness View angle Response time Connector USB User controls Control keys Power supply Input Power consumption Physical Unit dimension Unit weight Environmental Temperature range Relative humidity 12 | Product Specification 10.1” TFT LCD, LED backlight，tablet module built in. 1024 x 600 180 cd/m2 (typical) H 90°, V 65° 10 ms USB x1 Power switch, Brightness +/- DC5V 0.7A, USB Powered Tablet monitor mode: On 4W, Sleep <0.
4.2 Interactive Pen Type Technology method Active area Technical Specs Resolution Tracking speed Pressure sensitive Accuracy Height readable Electromagnetic resonance method Full screen 1000 LPI (line per inch) 130 PPS (points per second) 1024 levels ± 0.
5. Appendix 5.1 Replacing the Pen tip When the tip gets too short or develops a sharp edge, you can replace it with the spare tips. Please follow below step: 1) Use the tip replacement tool to pull the old tip straight out of the pen. 2) Insert a new pen tip into the stylus pen and push the tip until it stops. Note: Tip replacement tool and spare tips are included.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
