Manual
Table Of Contents
- SmartOTDR Mainframe
- Table of Contents
- About This Guide
- Chapter 1 Safety information
- Chapter 2 Introducing the SmartOTDR
- Chapter 3 Starting up
- Chapter 4 Setting-up the SmartOTDR
- Chapter 5 Optical options
- Chapter 6 Microscope application
- Chapter 7 Connectivity
- Establishing connection
- Remote Control
- Smart Access Anywhere
- Connection modes
- Pre-requisite for using the Smart Access Anywhere Application
- Downloading the VIAVI application on PC
- Downloading the VIAVI application on Tablet/ Smartphone
- Launching the SmartAccess Anywhere application
- Using Remote screen and File Transfer applications
- Working with files and directories on SmartOTDR
- Connection information and settings
- Data Transfer
- VNC
- Smart Access Anywhere
- Stratasync
- Chapter 8 File management
- Chapter 9 Technical specifications
- Chapter 10 Options and accessories
- Chapter 11 Maintenance and Troubleshooting
- Maintenance procedure
- Recycling Information
- Troubleshooting
- General information on warranty
- Index
Chapter 3 Starting up
Setting the adaptable plug to the mains adapter
12 User Manual 7SMART102 Rev006
Setting the adaptable plug to the mains adapter
The SmartOTDR is supplied as standard with a mains adapter and 4 country adaptable
plugs (Europe / UK / US / Australia).
Setting the correct plug to the mains adapter
1 Slide AC plug into adapter body as shown below.
2 Ensure tabs are located in slots shown before installing AC plug.
3 Insert AC plug fully until it «snaps» (clicking noise) into place.
Removing the AC plug from the mains adapter
1 Press both sides of dovetail.
2 While holding the dovetail, press down on AC plug slightly and slide AC plug out.
Figure 6 Sett
ing the adaptable plug onto the mains adapter
1
2
3
If the adapter plug is not correctly set onto the mains adapter, the con-
nector may be damaged.