User's Manual Part 1

Chapter 3 Testing
Assessing WiFi performance throughout a site
WiFi Advisor Wireless LAN Analyzer User’s Guide
December 2014 22073751, Rev. 002 Page 31
3 Select Two-Ended Site Assessment.
The Settings page appears.
4 If needed, specify the settings as described in “Specifying settings”.
5 Select Next... to initiate the Site Assessment test.
6 After the first location is tested, a green check mark or red “X” (a Go/No Go
result) appears next to the access point and station.
7 If you have another station, select Next Station Location. If not, go to step 8.
The other station must be another WiFi Advisor that is registered with the
App.
8 When finished testing, select Finish and Closeout. The Finish Test window
opens.
9 Enter the Customer Address. This appears in the closeout report.
10 To finish the closeout, save the results to a current job or a new job.
See“Managing jobs” on page 35