Electric Heating Constant Temperature Incubator Intelligent digital temperature controller Operation Manual
ISO9001:2000 quality system certification enterprise Preface Thank you for your purchase of the Electric Heating Constant Temperature Incubator. This Operation Manual is described in details for daily operation parameters. Precautions for safe operation recorded about the important contents of the safe use, please be sure to follow, to ensure the smooth completion of test.
Operation Manual Catalogue Product overview Product Features Technical Parameters Precautions for safe operation Controller operation instructions Packing List Documents 1、guarantee 2、Sales record
Product Overview: This device is widely used in items drying ,baking and heat treatment in the laboratory of industrial and mining enterprises,colleges and universities, scientific research institutes, Medicine and health care. Product Features: 1. The shell is made of high quality cold-rolled steel plate, surface electrostatic spraying. 2. Inner chamber is made of stainless steel. 3.
Technical Parameters: Model Voltage 303-00AB AC110V 60HZ Tem.range RT+5-70℃ Tem.fluctuation ±0.5℃ Working ambient tem. 5-40℃ Power 200W Inner chamber size mm (D×W×H) 260*280*280 Exterior size mm (D×W×H) Shelf load 440*415*585 15KG * Working environment:Temperature 5-40℃,Relative humidity <90%。 Precautions for safe operation (1) For the safety of the experiment, please install the external grounding device, and choose the power leakage protection device that matches the equipment.
Controller operation instructions Panel Instructions Operation and using (1) When the controller is switched on, display windows show “In index ( P, C, K, S )"” and the value of temperature range for 3 seconds, then it starts running. (2) Temperature and time settings: Press the “Set” button, the controller runs into the temperature setting state. Re-press the “Set” button, the controller runs into the time setting state.
Promp t Name Book boot Ot Setting range 0-9999m Instruction Not 0, the arrival time starts to run initial value 0 -100~ null adjustment 999 Pb Adjust this value when the controller's zero position error is large and the full scale error is small. Generally, Pt100 adjusts (intercept) -100.0~ 0 this value scarcely. 999.9 PK Full-scale -1000~ adjustment 2000 Adjust this value when the controller's zero position error is large and the full scale error is small.
CE Ct timing unit Refrigeration control delay upper bias CH setting of refrigeration control Lower bias CL setting of refrigeration control drt Open door test 0-1 0~3600 秒 0~full scale 0.0~full scale 0 takes a timing unit of minute, and 1 takes a timing unit of hour. The time required for two adjacent compressor starts, Ct=0 means to cancel the compressor function. When the temperature exceeds the CH value and conforms to the refrigeration control delay of the compressor, the 0 0 0.
Guarantee Thank you for purchasing the products of our company. Our products are strictly managed in quality. Please contact us in time so that we can make a good customer record and be convenient for us to follow up. In case of failure, the following conditions are guaranteed by the company: Product inspection certificate Product name Model Product number Date of production inspection: Guarantee conditions 一、Free maintenance condition: 1.
Warranty card(User owns) Product model Productname Buyername Add/ postcode Phonenumber Supplier Manufacturingdate Productnumber Purchase date Repairer Maintenance record Date Userinstructions Maintenance feedback sheet(Send back to the manufacturer) Product model Productname Buyername Add/ postcode Phonenumber Supplier Manufacturingdate Productnumber Check record Purchase date Repairer Date Userinstructions