Technical Support and E-Warranty Certificate www.vevor.com/support DUCT CLEANING BRUSH MODEL: DB22 / DB29/DB37 /DB22-DS / DB29-DS / DB22-DP / DB29-DP We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and does not necessarily mean to cover all categories of tools offered by us.
DUCT CLEANING BRUSH MODEL: DB22 /DB29 /DB37 /DB22-DP /DB29-DP /DB22-DS /DB29-DS The picture is for reference only, the number of accessories for each model is slightly different, subject to the actual. NEED HELP? CONTACT US! Have product questions? Need technical support? Please feel free to contact us: Technical Support and E-Warranty Certificate www.vevor.com/support This is the original instruction, please read all manual instructions carefully before operating.
PARAMETER LIST model DB22 DB29 DB37 DB22 -DP DB29 -DP DB22 -DS B29 -DS Total length of pole 30ft /9m 40ft /12m 50ft /15m 30ft /9m 40ft /12m 30ft /9m 40ft /12m net weight (kg) 1.06 1.35 1.68 1.45 1.75 1.17 1.
Chuck connector 1 1 1 blockage removal tool 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 Vacuum hose kit -adaptor Vacuum hose kit -hose Vacuum Cleaner Adapter & Dryer Adapter Handheld lint removing brush working gloves storage bag 1 1 -3- 1
SECURITY & WARNINGS In this section, you will find all the important information you need to be aware of before engaging in using your duct brush. Safety should be your top priority while using this product. Please read this information carefully, as improper use could damage the duct brush. - Always rotate the rods in the clockwise direction. Failure to do so will cause the rods to unscrew and disconnect. - Wearing eye protection, working gloves and a dust mask or respirator is recommended during assembly.
OPERATION STEP 1:Determine what material of venting you have. If white vinyl is currently installed, it is recommended to switch to a rigid or semi-rigid all metal venting. White vinyl and foil vinyl can be damaged if extra care is not taken when cleaning. STEP 2:If there is a screen or louvers on the exterior vent hood, they will need to be removed during cleaning. If there is a damper, it will need to be either taped or clipped in the open position until the cleaning is completed.
STEP 4:Using the lint brush and a vacuum, clean the back of the dryer as well as the surrounding area. STEP 5:Disconnect the vent from the back of the dryer. Using the shop \AC/Blower adapter, attach it to the vent using duct tape. If the vent compresses when the vacuum is turned on, or the vacuum ramps up, this indicates there is a blockage. At this point use the heavy Blockage Removal TDOI to attempt to remove the debris.
STEP 7:Cleaning from the inside of the house Feed the first rod through the Shop VAC adapter and connect the brush and drill. Make sure the adapter is taped to the end of the vent. Complete steps 7 and 8 as was done from the outside. With the vacuum or blower running, begin to spin the brush and extension rod into the vent. Remember: Do not apply too much force or over torque the rods while feeding them into the vent. Ensure that the drill clutch is at half or lower.
STEP 9: Once the system is cleaned, remove tape or clip from the outside damper, and return any louvers or screens that were taken off. Connect the vent back to the dryer with the correct material, and slide the dryer back in place. Ensure that the dryer is plugged in and turn it on. On the exterior of the house check for airflow from the vent hood. If completely cleaned, there should be a higher volume of air coming out of the vent hood.
brushing from the inside. The vacuum will help pull and catch any debris that is broken loose. Dryer Lint Vacuum hose Attachment - It is an adaptor to connect easily and is suitable for most vacuum cleaners. The flexible vacuum hose can deeply clean the lint accumulated in the dryer for many years. Handheld LINT BRUSH Lint trap and lint screen duct cleaning can be done with the lint brush. An extension rod can also be attached to the lint brush to help get to hard to reach places.
Address:Baoshanqu Shuangchenglu 803long 11hao 1602A-1609shi Shanghai Imported to AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australia Imported to USA: Sanven Technology Ltd..
Technical Support and E-Warranty Certificate www.vevor.