Manual

9
Digits Input: Press
F
key to edit current number. Change input cursor to left.
Press
C
key to clear current number.
Press
0
key to decrease. Press
T
key to increase.
Press to confirm..
4.3 Setup Detail
F1 – Scale
F1.1 – Approval
Selection: no(Factory default) - none
OIÑÖL - OIML
ntEP - NTEP
otHEr - Other approval
F1.2 – Scale Capacity & Increments
F1.2.1 – Units
Selection: 1 - kg (Factory default)
2 - lb
F1.2.2 – Ranges
Selection: 1 r – 1 Range (Factory default)
2 r - 2 Ranges
F1.2.3 – Capacity (First Range)
Selection: 3 … 20’000 (Factory default 6)
F1.2.4 – Increments (First Range)
Selection: 0.0001 ～ 10 (Factory default 0.001)
F1.2.5 – Capacity (Second Range)
Selection: 3 … 20’000 (Factory default 3)
Notes: Capacity (Second Range) should less than Increments (First Range).
F1.2.6 –Increments (Second Range)
Selection: 0.0001 ～ 10 (Factory default0.001)