Instruction Manual

3
WARNING LABEL IDENTIFICATION
MAKE SURE ALL WARNING LABELS ARE IN PLACE!
1
*Product safety signs or labels should be
periodically inspected and cleaned by the
product users as necessary to maintain
good legibility for safe viewing distance . . .
ANSI 535.4 (10.21)
Contact manufacturer for replacement la-
bels if needed.
1
BAIL STOP PIN MUST BE PLACED IN THE
HOLE THAT WILL STOP THE BAIL OVER
CENTER OF THE LOAD. FAILURE TO DO THIS
MAY RESULT IN LOAD DUMPING.
T&S Equipment Company
Phone [phone] Fax [phone]
CAUTION
!
386
CONSULT OWNERS MANUAL BEFORE USE
CAUTION
!
387
BAIL ADJUSTMENT PIN MUST BE
PLACED IN FIRST HOLE WHILE MOVING
PALLET LIFTER WHEN EMPTY
T&S Equipment Company
Phone [phone] • Fax [phone] • www.tseq.com
CAUTION
!
388
2
3
3
2