User's Manual
Table Of Contents
- WA6R25_FCCID_UsesManual.pdf
- WA6R25_FCCID_UsesManual.pdf
- WA6R25_FCCID_UsesManua.pdf
- _
- FCC Hearing-Aid Compatibility (HAC) Regulations for Wireless Devices
- On July 10, 2003, the U.S. Federal Communications Commission (FCC) Report and Order in WT Docket 01- 309 modified the exception of wireless phones under the Hearing Aid Compatibility
- Act of 1988 (HAC Act) to require digital wireless phones be compatible with hearing-aids. The intent of the HAC Act is to ensure reasonable access to telecommunications services for persons with hearing disabilities. While some wireless phones are used near some hearing devices (hearing aids and cochlear
- implants), users may detect a buzzing, humming, or whining noise. Some hearing devices are more immune than others to this interference noise, and phones also vary in the amount of interference they generate. The wireless telephone industry has
- developed a rating system for wireless phones, to assist hearing device users find phones that may be compatible with their hearing devices. Not all phones have been rated. Phones that are rated have the rating on their box or a label located on the box.
- The ratings are not guarantees. Results will vary depending on the user’s hearing
- device and hearing loss. If your hearing device happens to be vulnerable to interference, you may not be able to use a rated phone successfully. Trying out the phone with your hearing device is the best way to evaluate it for your personal
- needs.
- M-Ratings: Phones rated M3 or M4 meet FCC requirements and are likely to generate less interference to hearing devices than phones that are not rated. M4 is the better/higher of the two ratings. R620 is rated M3.
- T-Ratings: Phones rated T3 or T4 meet FCC requirements and are likely to be more usable with a hearing aid’s telecoil than phones that are not rated. T4 is the better/higher of the two ratings. R620 is rated T3.
- Please power off the Bluetooth function while using hearing aid devices with your PB65100.
- Hearing devices may also be rated.
- Your hearing device manufacturer or hearing health professional may help you find this rating. Higher ratings mean that the hearing device is relatively immune to
- Interference noise.
- _
- 14 Safety and regulatory guide
- The hearing aid and wireless phone rating values are then added together. A sum of 5 is considered acceptable for normal use. A sum of 6 is considered for better use. A sum of 8 is considered for best use. In the above example, if a hearing aid meets the M2 level rating and the wireless phone meets the M3 level rating, the sum of the two values equal M5. This should provide the hearing aid user with “normal usage” while using their hearing aid with the particular wireless phone. “Normal usage” in this context is defined as a signal quality that is acceptable for normal operation. This methodology applies equally for T ratings. The M mark is intended to be synonymous with the U mark. The T mark is intended to be synonymous with the UT mark. The M and T marks are recommended by the Alliance for Telecommunications
- Industries Solutions (ATIS). The U and UT marks are referenced in Section 20.19 of the FCC Rules. The HAC rating and measurement procedure are described in the American National Standards Institute (ANSI) C63.19 standard.
- _
- For information about hearing aids and digital wireless phones
- FCC Hearing Aid Compatibility and Volume Control:
- http://www.fcc.gov/cgb/dro/hearing.html
- Gallaudet University, RERC:
- https://fjallfoss.fcc.gov/oetcf/eas/reports/GenericSearch.cfm
- _
- _
- _
4
normal use. Users can disarm the SIM card protection but illegal
use of the SIM card cannot be prevented.
If the PIN code input is error for three consecutive times, your SIM
card will be locked by the network. There will enquire the PUK code
which provided by your network operator. If the PUK code input is
wrong for 10 times, the SIM card will be permanently barred.
Note:
Your network operator will set a standard PIN code and you
should change it to private password.
1.3 Plug and unplug the Memory card
Open the memory card holder, and insert the memory card into the
slot at the bottom according to the chat below, then close the
memory card holder.
1.4 Plug and unplug the earphone
Open the USB cover and insert the connector of the earphone to the
earphone jack at the right side of the mobile phone. Gently pull out
the earphone to remove it.
1.5 Status bar and content
In standby screen you can get the information that you need from
the indication icons on the screen.
Indicating that the SIM1 is connecting network currently
Indicating there is unread SMS of SIM1
Indicating there is unread MMS of SIM 1
Divert all voice calls has been set of SIM1
Indicating missed call of SIM1
The current alert type is ring only
The current alert type is vib. only