vehood30ch

ManualsBrandsVerona ManualsCooking Appliances30 Inch Wall Mount Range Hood with 4 Fan Speeds, 600 CFM Blower, Electronic Touch Control, LED Lighting, Dishwasher Safe Baffle Filters, Remote Control, Delayed Power Shut Off, Rounded Seamless Edges, ETL and cETL Approved

Page 12

Range Hood Operations

Control Panel Layout and Buttons Congurations:

In addition to the remote control feature, this range hood is also equipped with a heat sensor that will self-calibrate

in 5 seconds when the range hood is rst electrically activated and beeps when self-calibration is done. To con-

serve energy, the LCD panel will turn off automatically after 5 seconds of inactivity.

Adjusting Heat Sensitive Auto Speed (HSAS) Function:

• Press Auto Function button to Turn On/Off the Auto Mode. The Auto Function Icon will appear in the

LCD Panel when Auto Mode is On.

• While the range hood is off and Auto Function is activated, the blower will turn on to its highest speed

automatically when the internal temperature is 4 times above the external temperature. Then it will adjust the

speed level (between speed levels F4 to F1) automatically according to the detected temperature between the

sensors (4 times to 1 time). The speed level can also be manually overwritten by press the Increase or Decrease

button and Auto Function will reactivate after 2 minutes. The blower can ONLY be turned off MANUALLY or

activate the delay off timer function.

Activating Normal Blower Function:

• While the range hood is off, press Increase or Decrease button to start the blower. Press Increase button

to increase blower speed (F1 to F4) as indicated in LCD panel. The Increase button cycles blower settings from

off (00), quiet speed (F1), low speed (F2), medium speed (F3) to high speed (F4).

• While the range hood is on and the blower is running, press Decrease button to decrease blower speed

(F4 to F1) as indicated in LCD panel. The Decrease button cycle blower settings from high speed (F4), to medium

speed (F3), low speed (F2), quiet speed (F1) to off (00).

Remote Control

Sensor

Power-Off

Delay

Light

LCD Panel

Decrease

Increase

Auto Function

• While th

e range hood is off, p

ress and hold Auto Funct

ion button to e

nter the temperature

setting

mode. Pres

s Increase or

Decrease button to a

djust the comparison

temperature value b

etween the internal an

external he

at sensors from 8°F to 20°F. The temperat

ure setting mode will exit automatically af

ter 5 seconds of

inactivity.