User Manual

BRIDGING SMART ZONES

• ThebridgingzonefunctionallowsyoutousetwoSmartZonestogethergivingyoualargercookingarea.Yourpan(s)willneedto

coverbothcookingzones.

• Theremaybeacoolerareainthecentreofthecooktopbetweenthebridgedcookingzones.Youmayneedtomovefoodaround

thepantoensureevencooking.

• Whenusingbridgingzonesitisnotpossibletousethe“PowerBoost”function.

To select the bridging function:

1. Placethepanonthecooktopoverthetwozonesyouwishtouse,coveringbothcookingzones(asshownabove).

2. Pushinandturnbothcontroldialsfortheselectedcookingzonesclockwisetothehighestheatsetting“9”.

3. Turnbothdialsto

andholduntil appearsinthecookingzonedisplays.

 Thefrontcookingzonedisplaywillshowtheheatsetting.Therearcookingdisplaywillshow

4. Usethefrontcookingzonecontroldialtoadjusttheheatsettingforthebridgedzone(“1”÷“9”).

 Adjustingtherearcookingzonewillcancelbridging.

If no pan is detected

• Ifnopanisdetectedoneithercookingzone,thefrontcookingzonedisplaywillalternatebetweentheselectedsettingand

.

Therearcookingdisplaywillshow

• Ifnopanisdetectedononecookingzone:

 Thefrontcookingzonedisplaywillstillshowtheselectedheatsettingandtherearcookingzonedisplaywillstillshow

.

 Ifafter10minutesnopanisdetected:

– thebridgingfunctionwillswitchoff;

– thecookingzonewithoutadetectablepanwillcontinuetoshow

;

– theremainingcookingzonewillcontinuecookingattheselectedheatsetting.

Using the “Fast heating” function in bridged mode

1. Bridgethecookingzones.

2. Turnthecontroldialforthefrontcookingzonebackpast“OFF”to

.Holdthedialat until startsalternatinginthedisplay.

3. Turnthecontroldialtoyourselectedheatsetting.Theheatsettingand

willalternateinthedisplay.

4. Thebridgedzoneisnowsetfor“Fastheating”.

To cancel bridging

Turnbothcontroldialsbackto“OFF”.

Fig. 2.6