Communications Network Router User Manual

22
Connecting in Wi-Fi Mode the first time:
Access MiFi Settings
Overview$
After VZAccess Manager and the device drivers have been installed on your computer, you
may elect to use the MiFi 2200 in WiFi mode.
The Web-based User Interface (shortened to Web UI in most of this document) is used to
configure the MiFi 2200 while it is in “Wi-Fi” mode. In this mode, there is no USB connection
from your host computer to the MiFi 2200, and the connection to the MiFi 2200 must be made
via Wi-Fi.
How$to$Connect$the$MiFi $2200$in$Wi‐Fi$Mo de$$
(No $USB$cabl e)$
Note: The battery must be fully charged in order to use the MiFi 2200 in Wi-Fi mode
for the first time. (See Page 13 Setup: Wi-Fi Modem: Battery Use).
!!
When you connect the MiFi 2200 in Wi-Fi mode, the following should occur once you press
the power button:
• The MiFi 2200 is powered as soon as you press the power button and the Power LED lights
up.
• Once the MiFi 2200 is powered and has been activated, it automatically connects to the
Internet provided that Mobile Broadband / NationalAccess service is available and one or
more Wi-Fi devices are connected with MiFi.
• The 3G Status LED indicator on the device lights up and blinks according the connection
speed.