Communications Network Router User Manual

19
Installati on:$Windows$and$Mac$
1. Turn on your computing device and close all applications.
2. Connect the MiFi 2200 to your computer using the included USB Cable.
a) Insert the USB cable into the microUSB port on the USB on the MiFi 2200 and
the other end into the USB port of your computer.
b) MiFi 2200 will power on automatically.
3. WINDOWS: VZAccess Manager Installer automatically launches and the MiFi 2200 drivers
automatically install once installation is complete (this may take few moments).
If VZAccess Manager does not automatically install, go to Start>My Computer and click to
open the CD-ROM drive icon. Select setup.exe and wait a few moments for the software
and drivers to automatically install.
MAC: The VZAccess Manager CD icon appears. Click to open and select VZAccess Manager
to launch the installer. Follow the onscreen instructions to install the software and
drivers.
Launch VZAccess Manager. The first time you launch VZAccess Manager the VZAccess
Manager Setup Wizard appears. Following the on-screen instructions to configure the
3.
NOTE: If you are experiencing trouble easily connecting the USB cable into your computer’s
USB port and into the device:
Verify that you are inserting the USB cable in the proper orientation.
Verify that you are using a Type-A USB port on your computer.
Verify that you are connecting the microUSB connector end of the cable into the microSD
port on the device.